Dave A Posted July 6, 2019 Share Posted July 6, 2019 I have updated these clamp plates to fit more drivers. For the K-77 type we have These holes are 3" or 76.2mm and for 5mm socket head screws, 2.252" or 57.2mm 5mm socket head and 2.001" or 51mm and 5mm socket head. Of course not all drivers that fit on here will fit where the K-77 goes although some of the pro gear with K-77's have enough room for the DE10 if you wanted to. On the larger K-79,76 2.54cm type large MAHL's we have this It has the same set of holes as the small MAHL with the addition of 3" or 76.2mm for 1/4 20 socket head screws. The 1 3/8 18tpi internally threaded plate for both lenses has not changed. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.