shaark Posted July 16, 2019 Share Posted July 16, 2019 After setting up a set of tp-link Powerline AV 2000 adapters I started to get noticeable crackling sound from the Promedia 2.1 BT speakers. The speakers are powered through the same outlet as the Powerline adapter for a PC. There are no other close power outlets where to connect the speakers to reduce the interference. The static noise is still audible when the speaker volume is set to minimum and the audio cable not connected to the PC. Any suggestions to eliminate the interference? Quote Link to comment Share on other sites More sharing options...
WMcD Posted July 19, 2019 Share Posted July 19, 2019 I'm not really familiar with either of the units. However. Is it possible to turn off the Bluetooth receiver to determine whether the signal is getting into the Klipsch unit that way? OTOH it may be that the signal is getting in through the various feed wires. This could be solved, maybe, by the use of ferrite line filters from Parts Express. Does anyone else out there have any suggestions for our new member? 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.