Jump to content

Behringer NU3000DSP power amplifier with Art Cleanbox and cables


Pats3of4

Recommended Posts

For sale is the NU3000DSP amplifier.  If you want to use it with a receiver, I have a brand new Art Cleanbox with xlr cables to boost pre-out levels.  I also have a pair of Neutrik to banana plug cables for passive subs or cables.  

 

$168 shipped for the amp.  Add $55 if you want the other stuff as well.

 

 

The Behringer NU3000DSP iNuke power amplifier packs massive amounts of output power into an exceptionally lightweight, rack-mountable package. Behringer's revolutionary high-density Class-D technology combined with ultra-efficient switch-mode power supplies ensures these feather-light powerhouses will drive your rig effortlessly for many years to come.

Superb Transient Response
Behringer spent years fine-tuning the high-density Class-D technology that gives the iNuke Series its oomph. By carefully selecting transistors with extremely high slew rates and optimizing other proprietary parts of the circuitry, these amps react instantly to even the most demanding electronic bass impulses.

When this amazing amplifier technology is combined with Behringer's state-of-the-art switching-mode power supplies, these amplifiers provide tremendous punch. And because they are so much more efficient than conventional designs, they run cooler and don't require the massive heat sinks and heavy toroid transformers typically associated with their conventional counterparts.

Sublimely simple operation
The front panel controls and indicators provide your system's vital signs at a glance. After pressing the power button, the power LED lights to show the amp is ready for action. All channels feature positive-detent gain controls with signal LEDs that light when a signal is present, as well as clip LEDs to indicate when the signal is distorted and you need to reduce the input signal.

The rear panel is just as elegant, with combo XLR and 1/4" TRS input connectors making the iNuke compatible with virtually any source, balanced or unbalanced. Professional twist-lock speaker sockets are provided to ensure every drop of output power gets to your loudspeakers. The rear panel is also where you'll find the switches that enable iNuke amps to work in either dual mono, stereo or mono bridge mode. A built-in crossover switch enables the amp to operate in biamp mode, sending low frequency content to passive subwoofers, while the high frequency output is channeled to fullrange loudspeakers (CH1>100 Hz / CH2<100 Hz or fullrange). Flick the "Limiter On/Off" switch to activate the built-in overload protection, or turn it off if you're feeling lucky.

iNuke DSP
For sound engineers requiring high-level control capability, iNuke DSP Series amplifiers come ready for action right out-of-the-box. The built-in DSP and 24-bit/96 kHz converters ensure the ultimate signal integrity with an extremely broad dynamic range. DSP functions include a sophisticated delay for delay-line loudspeakers, crossover, EQ (eight parametric, two dynamic), and dynamics processing with lockable security settings. A convenient front panel LCD display allows you to setup and make adjustments directly at the amplifier, without the need for a PC. All iNuke DSP models can also be set up, controlled and monitored via the front panel USB connector.

Value
Sporting massive output ratings, lightweight Class-D technology, an equally lightweight price tag, and all the amenities a professional audio engineer could ask for, Behringer iNuke amplifiers are serious amps for the most demanding applications.

Features
- Delivers 2 x 1500 Watts into 2 Ohms; 2 x 880 Watts into 4 Ohms; 3000 Watts into 4 Ohms (bridge mode) and weighs less than 8 lbs / 3.5 kg
- Ultimate reliability through revolutionary cool-running High-Density Class-D technology with "near-zero" thermal buildup
- Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption
- High-performance DSP and 24-bit/96 kHz converters deliver ultimate signal integrity and extreme dynamic range
- DSP section features sophisticated delay, crossover (3 filter types, up to 48 dB/octave), EQ (8 parametric, 2 dynamic), dynamics processing and lockable security settings
- Front panel LCD display enables setup and adjustment without PC
- Can be set up, controlled and monitored via front panel USB connector
- "Zero-Attack" limiters offer maximum output level with reliable overload protection
- Built-in Subwoofer/Satellite crossover for perfect subwoofer operation
- Detented and illuminated gain controls for precise level setting
- Precise 4-segment Signal and Limit LEDs to monitor performance
- XLR and 1/4" TRS combination input connectors for compatibility with any source
- Professional twist-lock speaker connectors for ultimate reliability
- Independent DC, LF and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show
- "Back-to-front" ventilation system prevents thermal buildup for reliable operation
- High-quality components and exceptionally rugged construction ensure long life
- Conceived and designed by Behringer Germany

Shipping Weight: 10 lbs
Shipping Dimensions: 22 x 12 x 7 in

5A6B38BE-5768-42CB-92A0-9F4D04F61C74.png

Link to comment
Share on other sites

32 minutes ago, Pats3of4 said:

Sold

Quick question for you.

 

You mentioned the Art Cleanbox can boost the RCA signal.  I have a pair of Inuke 3000dsp and I've never felt like they performed with my dual Umax 15's like I thought they would.  The subs sound OK but they don't shake the walls.  I use an Onkyo TX NR 717 AVR as a pre-pro for amps and for dual sub-out.

 

Is the Cleanbox the solution to that, in your opinion?

Link to comment
Share on other sites

11 minutes ago, Pats3of4 said:

Yes, def get it.  That is what is lacking.  Oh man, you are going to be SHOCKED!

 

If only I had a buddy who would sell me one at a discount!  :lol:

 

Hey, but don't worry about me.  I'll get one.  At full retail.   😭

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...