Jump to content
The Klipsch Audio Community
jwc

ampsandsound Kenzie Encore

Recommended Posts

I've had my ampsandsound Kenzie Encore for a couple of years now.  I thought I would give a review here as many Klipsch fans like to mate their beloved speakers with tubes.

 

https://www.ampsandsound.com/products/kenzie-encore-headphone-amp

 

I'm not new to tubes.  However, I'm not a veteran either.   I've certainly owned more solid state in the past...esp McIntosh.  In fact, my goal over the last few years was to have all or mostly McIntosh electronics.

 

Well, I just can't seem to let this little cute preamp go.  It is small and well finished with a nice layout.  It has two pairs RCA Inputs and one pair RCA Outputs.  It also has two different headphone outputs that I've used but not going to review here.  Instead, this is used mostly as a preamplifier for me.

 

You can look up the specs on the website but the unit uses: 


Input tube: 12SL7 or equivalent
Output tubes: 1626 or VT-137

 

The tubes that came with it were just fine.  You can find buy extras online for cheap.  With an adapter, I switched the input tube to a Telefunken 12AX7.

 

I use this preamp with the Oppo BDP105D and use the Oppo as the volume control;  as the Kenzie has no remote.  I have two different set of amps interchangeably mated with my Cornscalas which my son and I love to listen to.  We use either two monoblocked McIntosh MC275's or Mcintosh Monoblock MC1201's.  I can't decide what combo I like best but right now currently have them with MC275's.  Recently, I acquired Klipsch KI-396's and have the MC1201's on them.  I now use the Kenzie Encore with both sets of speakers.  I also have it in the chain of my KP600 system with active crossovers and 10 channels of amplification.

 

First off, the unit is solid.  Heavier than you would think.  When you power this up, there is no hum, buzz, click, or hiss.  Power down is uneventful.  Background is silent.  You can't tell its on.  This is remarkable as my stereo is a highly efficient and high powered system with a combination of many components.  Despite it being labeled as a Headphone Amplifier, it has enough gain to drive all these amplifiers keeping a low noise floor.   In fact, I keep the gain knob at the 11 O'clock position.

 

So let's hear about the sound.  

 

This certainly sounds like a tube preamplifier with the highs that sparkle and the mids that come forward.  Fortunately, there is no substantial roll-off of the top end and the bass isn't boomy.  I would call the low frequencies balanced without bloat.   At no time did I hear any glare or brightness that can sting my ears in the 8-10K range like some other amp-preamp combinations I've had.  My ears are sensitive to those frequencies and I've had other setups with my MC275s and 1201s that have that notable issue.

 

I don't have the words to describe how this preamp can add a sense of realism and emotion.  It seems to bring me back to listening to music with joy as opposed to listening to the speakers and focus on things such as clarity and dynamics.  In other words, I forget about being a critic of the sound and instead sink into my sofa chair and listen.  I'm not saying this preamp doesn't have clarity and dynamics, what am saying is that I find I don't focus on it.  There is definitely 3-D and spacial movement as the music sets a stage in front of you.  This is hard to put into words until you've experienced it.  

 

The preamp is a keeper that I feel is rightly priced.

  

jc

  • Like 2

Share this post


Link to post
Share on other sites

Thanks JC. Glad you’re enjoying. The 1626 is a really magical sound.  

Share this post


Link to post
Share on other sites

JC,  talk of the oppo 105 as a preamp/volume control sometimes  centers around bit stripping (when used <~75%) in the digital domain.  Have you found these claims relevant in your use?

Share this post


Link to post
Share on other sites

I havent noticed

Share this post


Link to post
Share on other sites

Nice review.  Maybe you ought to bring that over sometime.  :)

Share this post


Link to post
Share on other sites

Great review JC.

 

I "think" 🤔 you use to have the JuicyMusic Merlin Preamplifier, how would you compare it to your Kenzie Encore?

 

 

Share this post


Link to post
Share on other sites

The Encore is a headphone amp 1st but we discovered it works so well as a pre. 

The Juicy gear is true pre is every sense as are the NOS Valve pre.

Id love to hear all three in the same rig. Id suspect the NOS Valves would be the winer, but the Encore could have honorable mention on multi use merit. 

 

Share this post


Link to post
Share on other sites
On 8/8/2019 at 9:50 AM, HPower said:

Great review JC.

 

I "think" 🤔 you use to have the JuicyMusic Merlin Preamplifier, how would you compare it to your Kenzie Encore?

 

 

 

Sorry, I was out of town.


I will keep this brief.  I had all the JMA products.  Version 1 and 2s.  The Super Merlin was great.  I would say that preamp was quiet but not near as quiet in the background as the Encore.  The JMA has a nice midbass and palpable sound that was very appealing.   Never harsh and drove the bass very well.  What it didn't have that the Encore has, is my descriptions above....3D, Spatial, etc.....that does something that makes you love the music.  I won't go more into details really.  It is different than the JMA sound.

 

jc

Share this post


Link to post
Share on other sites

I still really like the regular Merlin (which I have), but the 6299/6DJ8 is really finicky. When it is right, I still think it beat the JMA BBX. Just not all the features some would want (like a phono pre).

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...