finallygotmyheresies Posted August 16, 2019 Share Posted August 16, 2019 Just admiring these horns I saw listed on usaudiomart. https://www.usaudiomart.com/details/649544696-jbltadaltec-bentwoodhorns/ Description Bentwoodhorns sapele mahogany 2 inch HF horn which is sand casted with sapele mahogany ,with JBL 2441 driver with original diaphragm . any 2 inch can be used have tried many TAD,JBL,ALTEC . LF is a great plains 416 crossover point is 650hz The flare of the horn is similar to a altec 210 or altec 211 cabinet but with 1 416 these are very efficient my klipsch horns which are 105 db don't come close maybe 108 which is like the altec 210 cabinet These mid bass horns go down to 50hz again much like a klipsch lascala The LF section is also sand casted totally dead which makes these extremely heavy , just the LF takes 3 men to lift. If you need more lows and don't have a quality sub I also have the 18 inch sub which can be purchased also with the same sapele mahogany it to is a horn which looks like a oversized klipsch khorn 3 Quote Link to comment Share on other sites More sharing options...
Schu Posted August 16, 2019 Share Posted August 16, 2019 Yeap... beautiful Quote Link to comment Share on other sites More sharing options...
Edgar Posted August 16, 2019 Share Posted August 16, 2019 I thought that backdrop looked familiar: https://community.klipsch.com/index.php?/topic/183920-klipschorns-sw-of-st-louis/&do=findComment&comment=2384902 I need to get to know this guy. Quote Link to comment Share on other sites More sharing options...
Schu Posted August 16, 2019 Share Posted August 16, 2019 Is that just thin veneer over metal on the horn? I don't see why no one wouldn't give this a try with a with a 402. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.