Jump to content
The Klipsch Audio Community
Sign in to follow this  
Ron E

Klipsch rp500sa

Recommended Posts

I am looking for some wall mounted speakers to use for Atmos, and Auro3d. I am currently running the RP160M speakers for my fronts, but will be using them for surrounds when I get my k402MEHs made. I looked at the specs for the 500sa, but is doesn't have the sensitivity specs. My walls are about 18'tall before the Boveda ceiling starts which peaks at 32' high. I am planning on running my height channels, and about 13' high. I am planning on running them on the front wall, and the rear wall which will put the front heights about 21' away from the MLP. I am concerned with my Atmos speakers having enough umph . I will be powering 4 of them with a pair of Yamaha P2500s amps which are rated at 250wpc.

 

Does anyone know what the sensitivity is on the 500s?

Share this post


Link to post
Share on other sites

No one knows the efficiency of these soeakers?

Share this post


Link to post
Share on other sites
On 9/2/2019 at 9:57 PM, Ron E said:

I am looking for some wall mounted speakers to use for Atmos, and Auro3d. I am currently running the RP160M speakers for my fronts, but will be using them for surrounds when I get my k402MEHs made. I looked at the specs for the 500sa, but is doesn't have the sensitivity specs. My walls are about 18'tall before the Boveda ceiling starts which peaks at 32' high. I am planning on running my height channels, and about 13' high. I am planning on running them on the front wall, and the rear wall which will put the front heights about 21' away from the MLP. I am concerned with my Atmos speakers having enough umph . I will be powering 4 of them with a pair of Yamaha P2500s amps which are rated at 250wpc.

 

Does anyone know what the sensitivity is on the 500s?

Ron: all I could find was this so I expect you did too but will post it just in case you may not have Will keep an eye out.

 

https://f072605def1c9a5ef179-a0bc3fbf1884fc0965506ae2b946e1cd.ssl.cf2.rackcdn.com/product-specsheets/RP-500SA_Spec-Sheet_v01.pdf

  • Thanks 1

Share this post


Link to post
Share on other sites

I may be selling mine if you're interested. Not sure about the sensitivity but they worked very well for atmos when I had high ceilings and mounted them

  • Thanks 1

Share this post


Link to post
Share on other sites

Thanks for the response. While I was waiting, I came across 4 RP150Ms for a good price in cherry, so I will be using them for Atmos.

Share this post


Link to post
Share on other sites
On 9/6/2019 at 6:30 AM, schwock5 said:

I may be selling mine if you're interested. Not sure about the sensitivity but they worked very well for atmos when I had high ceilings and mounted them

I may be interested. Send me a PM when you get around to selling those.

  • Like 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...