bharat Posted October 15, 2019 Share Posted October 15, 2019 I have a pair of Forte II paired with a Marantz 2325 and absolutely love the sound! I have been thinking about diving into the world of tube amps for a while now and finally bit the bullet and picked up a Marantz 8 from 1959 and it seems to be in great condition (I will know for certain next week when it is in my hands). My question to the group is whether or not my Forte II would be a good speaker match to stand up to the Marantz 8 and fully obtain that warm amazing tube sound that all of you talk about so much? I plan to use my 2325 as a pre-amp until I can afford a tube pre-amp. Look forward to hearing from the group. I will post some photos later tonight. Bharat 2 Quote Link to comment Share on other sites More sharing options...
jimjimbo Posted October 15, 2019 Share Posted October 15, 2019 Should be a very nice match between the two. I believe that Thebes has either an 8 or 8B that he runs with his speakers, so he could probably let you know what to expect. With a unit such as that, I would recommend installing the best NOS tubes you can afford. @thebes 1 Quote Link to comment Share on other sites More sharing options...
Les Lammers Posted October 16, 2019 Share Posted October 16, 2019 4 hours ago, bharat said: I have a pair of Forte II paired with a Marantz 2325 and absolutely love the sound! I have been thinking about diving into the world of tube amps for a while now and finally bit the bullet and picked up a Marantz 8 from 1959 and it seems to be in great condition (I will know for certain next week when it is in my hands). My question to the group is whether or not my Forte II would be a good speaker match to stand up to the Marantz 8 and fully obtain that warm amazing tube sound that all of you talk about so much? I plan to use my 2325 as a pre-amp until I can afford a tube pre-amp. Look forward to hearing from the group. I will post some photos later tonight. Bharat It should be quite good sounding. If it has not been checked out by a competent tech I'd do that before you power it up. 1 Quote Link to comment Share on other sites More sharing options...
bharat Posted October 17, 2019 Author Share Posted October 17, 2019 Some photos so you can get a visual Quote Link to comment Share on other sites More sharing options...
bharat Posted October 17, 2019 Author Share Posted October 17, 2019 Wiring and back of unit photo 1 Quote Link to comment Share on other sites More sharing options...
Wolfbane Posted October 17, 2019 Share Posted October 17, 2019 On 10/15/2019 at 2:29 PM, bharat said: I have a pair of Forte II paired with a Marantz 2325 and absolutely love the sound! I have been thinking about diving into the world of tube amps for a while now and finally bit the bullet and picked up a Marantz 8 from 1959 and it seems to be in great condition (I will know for certain next week when it is in my hands). My question to the group is whether or not my Forte II would be a good speaker match to stand up to the Marantz 8 and fully obtain that warm amazing tube sound that all of you talk about so much? I plan to use my 2325 as a pre-amp until I can afford a tube pre-amp. Look forward to hearing from the group. I will post some photos later tonight. Bharat Great find, that Amp will go together with Klipsch speakers like butter on hot toast. Wb 1 Quote Link to comment Share on other sites More sharing options...
tube fanatic Posted October 17, 2019 Share Posted October 17, 2019 I see capacitors and diodes which absolutely must be replaced to ensure long term longevity. Be careful if you are going to continue using the amp in its present state. Maynard 1 Quote Link to comment Share on other sites More sharing options...
bharat Posted October 17, 2019 Author Share Posted October 17, 2019 2 hours ago, tube fanatic said: I see capacitors and diodes which absolutely must be replaced to ensure long term longevity. Be careful if you are going to continue using the amp in its present state. Maynard Thank you for the insight Maynard. May I ask for a bit more specifics on this? Do you mean that capacitors and diodes are old and therefore need replacement? Or do you mean that someone may have replaced them with incorrect / not ideal ones and I should try to restore back to as close to original state as possible? Thanks in advance for your help. Bharat Quote Link to comment Share on other sites More sharing options...
tube fanatic Posted October 17, 2019 Share Posted October 17, 2019 Except for 3 metal film resistors (the tiny blue ones), the underside looks totally original with a quick perusal. All of the capacitors under the chassis, and the two "can" type caps on top, need to be replaced as well as the solid state power supply diodes. The resistors need to be checked to see if they are within tolerance as many tend to drift to the high side of their value over time. It's wonderful that you have a unit which has not been butchered over the years; but, a full restoration by a competent technician is definitely in order. Once done you will have an amp which I suspect you will never want to part with! Maynard Quote Link to comment Share on other sites More sharing options...
bharat Posted October 17, 2019 Author Share Posted October 17, 2019 Thank you sir for the super helpful information regarding the amp. I am located in Portland, Maine and would welcome some recommendations for competent technician who maybe located relatively nearby. Thanks in advance. Bharat Quote Link to comment Share on other sites More sharing options...
tube fanatic Posted October 18, 2019 Share Posted October 18, 2019 Send an email to Bob Latino ( Bob01605@aol.com). I’m confident he can hook you up with a very capable tech within a reasonable distance. Maynard 1 Quote Link to comment Share on other sites More sharing options...
tom1066 Posted October 18, 2019 Share Posted October 18, 2019 I have an 8 (not the b) that I run with Cornwalls. It is a fantastic sounding amplifier to my ears. After having it a while I put in quad of Mullard El34s and the sound improved over the tubes that came with it. I got a ton of information about the marantz 8 at AK. Here is a link about newer tubes that work well in the 8 or 8b: https://audiokarma.org/forums/index.php?threads/best-new-el34s-for-8b.880974/#post-13010239 There is a member there, crooner, who restores vintage marantz tube units. He had some recs about what to replace, what to leave, etc; I guess in an effort to not change the overall sound. Not that his suggestions were the only ones I read about or were recommended but he did a restoration of a marantz 7 tube pre-amp that was really well thought out and planned, so I felt comfortable with his recs. Here is that thread link - https://audiokarma.org/forums/index.php?threads/ultimate-marantz-model-7-restoration-thread.727823/ I know that just for starters, as mentioned above, he recommended replacing the bias supply power caps (he actually said the old top hat diodes are fine and to leave them) and the cathode resistors. He is a big fan of leaving the Good-All caps in place as well. He also recommended using EF90 tubes as a replacement for the 6BH6, they have the mesh plate and are made in Holland. Congrats on obtaining a great amplifer, I'm sure you will love it. Tom 1 1 Quote Link to comment Share on other sites More sharing options...
tube fanatic Posted October 19, 2019 Share Posted October 19, 2019 Not to be argumentative, but the Good-All caps as well as the Sprague Black Beauty caps are very prone to value drift and failure. Given how inexpensive modern replacements are it is foolish to leave those in. The same goes for the old type diodes. A modern 4 cent replacement will do the job nicely. Maynard Quote Link to comment Share on other sites More sharing options...
tom1066 Posted October 19, 2019 Share Posted October 19, 2019 7 hours ago, tube fanatic said: Not to be argumentative, but the Good-All caps as well as the Sprague Black Beauty caps are very prone to value drift and failure. Given how inexpensive modern replacements are it is foolish to leave those in. The same goes for the old type diodes. A modern 4 cent replacement will do the job nicely. Maynard I 100% agree with you and I am certainly not being argumentative. I am not an expert or fanatic on these things or pretty much anything for that matter. Some people want the good-alls in and some want them out - I would say if they are replaced, just keep them. If for some insane reason you decide to sell the amp, some of the people/collectors that value the original stuff would want them and may pay more for having them. Heck if you are going to replace them just use these, the "super" capacitors that some of the Japanese restorers swear by. https://www.partsconnexion.com/arizona-film-capacitors.html Again I do not have an opinion on them and I do not condone, endorse, or swear by them. I have read some info and read about others that have used them and their enjoyment of them, but I have not heard any amps with them. And probably with my hearing loss, I doubt I could tell a difference if there is in fact a difference. Fortunately I do not have golden ears because it would mean this hobby could possibly become even more expensive. Quote Link to comment Share on other sites More sharing options...
rjp Posted October 20, 2019 Share Posted October 20, 2019 On 10/17/2019 at 4:49 PM, tube fanatic said: Except for 3 metal film resistors (the tiny blue ones), the underside looks totally original with a quick perusal. All of the capacitors under the chassis, and the two "can" type caps on top, need to be replaced as well as the solid state power supply diodes. The resistors need to be checked to see if they are within tolerance as many tend to drift to the high side of their value over time. It's wonderful that you have a unit which has not been butchered over the years; but, a full restoration by a competent technician is definitely in order. Once done you will have an amp which I suspect you will never want to part with! Maynard I agree technically of course with replacing all the caps, diodes, and out of spec resistors. The amp should not be used or even turned on as is. But at the same time, it is such a shame to ruin the authenticity. This amp is a real thing of beauty as is. Just looking at the effort put into hand wiring and routing of component leads and the way the labels are all aligned tells of a time of great pride in craftsmanship. It is a work of art. I would hate to see those beautiful vintage components replaced with modern equivalents. Just look at how the few blue metal film resistors and pink heat shrink stand out like sore thumbs. It is fairly easy to restore this amp electrically to like new condition for very little money, and I'm sure it will sound amazing, but it is almost certainly worth more in its current state. It's a tough decision for sure. If you do choose to restore it I would look for replacement parts that resemble the vintage components, i.e., use high quality new carbon resistors, and axial capacitors where available. The cans could be re-stuffed with new electrolytics, etc. Great find and best of luck! 2 Quote Link to comment Share on other sites More sharing options...
Wolfbane Posted October 20, 2019 Share Posted October 20, 2019 6 hours ago, Jeffrey D. Medwin said: Out of all the replies to this thread, what Tom1066 said rings truest to "me", about Crooner's ( seemingly experienced ) 8B updating approach. I feel, one should not try to change " all the caps" or " all the resistors", as SOP - standard operating procedure, because it changes the SOUND of the stock amplifier. However : One can MEASURE, individually, methodically, all the caps, as to their uF value, and measure each cap as to their ESR , and determine if ANY are way out of spec, and needing attention. Likewise, one can easily MEASURE, individually, methodically, all the resistors, to see if they drifted, and vary greatly from their intended ( schematic ) values. - - - - - - - - - - - There MAY possibly be no parts that are GROSSLY out-of-spec. This might take up to 3 hours of time / labor to do and carefully document these measurements in 2019, VS this piece being around and unchanged, virgin, since about 1959 ... six decades !! - - - - - - - - - - - I am sure I personally could easily improve upon the sound of this amp, by using well-thought-out new film caps, and highest-quality resistors. But then, it is no longer a Marantz 8B one is listening to. That's the RUB !!!! Have fun, but think twice, before acting. Its up to the Original Poster. This is just little-ole-me's " two cents " worth of thoughts. Jeffrey Medwin ^^^ This! ^^^ Wb Quote Link to comment Share on other sites More sharing options...
tube fanatic Posted October 21, 2019 Share Posted October 21, 2019 Jeff, the problem with measuring capacitors with a meter is that it tells you nothing about what they will do in the presence of high voltage DC ( plate bypass, coupling, etc.). I have experienced many which measure fine but fail under that condition. Also, many vintage caps will change value considerably with large temperature variations. I agree with rjp’s appreciation of the meticulous factory appearance. However, is it better to have a work of art which may burn up with use, or a modernized equally artistic rendition which will work flawlessly for many more decades? As to the amp being worth more in its current state that, of course, is a totally individual choice. Maynard Quote Link to comment Share on other sites More sharing options...
Wolfbane Posted October 21, 2019 Share Posted October 21, 2019 34 minutes ago, tube fanatic said: Jeff, the problem with measuring capacitors with a meter is that it tells you nothing about what they will do in the presence of high voltage DC ( plate bypass, coupling, etc.). I have experienced many which measure fine but fail under that condition. Also, many vintage caps will change value considerably with large temperature variations. I agree with rjp’s appreciation of the meticulous factory appearance. However, is it better to have a work of art which may burn up with use, or a modernized equally artistic rendition which will work flawlessly for many more decades? As to the amp being worth more in its current state that, of course, is a totally individual choice. Maynard Maynard, Do you have an older cap tester or what do you use to perform testing of old or used capacitors❓ Wb Quote Link to comment Share on other sites More sharing options...
tube fanatic Posted October 21, 2019 Share Posted October 21, 2019 Back in the day, when I had my shop, I owned many including offerings from Eico, Knight, Lafayette, and Heathkit. They were all quite decent and provided some useful information but certainly were not the last word. Now, I don't have any! Modern caps are so reliable, and cost effective, that I don't find it worth spending the time to test old caps especially when they have to be desoldered to do so (sometimes, in spite of using a heat sink on the lead, the heat from the iron is enough to cause a cap to fail). If I'm going to guarantee a piece of equipment which I've restored or constructed I don't want to deal with a call-back due to failure of an old part. This works for me. Others have their own philosophy. Some day, if I have time, I'll start a thread entitled "Tales from the service bench" and will relate stories about hours spent tracking down resistor and capacitor failures in audio equipment, radios, and TVs. Some are quite humorous! Maynard 1 Quote Link to comment Share on other sites More sharing options...
thebes Posted October 22, 2019 Share Posted October 22, 2019 I own an 8B and got some some static from a wonderful member of this Forum whom I greatly admire, when I re-did all the caps , resistors etc. because I would be changing that special 8b sound. True the sound did change, but not as much as you would imagine, and it's still the amp I use the most. One thing that will be difficult to source is the can-type cans on top. The values are not reproduced in can-style caps these days and it's a tough fit to get the five different values installed under the chassis. There was a company, whose name escapes me, that made a reproduction of the 8b for several years, and they had spare cans that they were selling. They may be out of stock by now, but I would do a little online research, track them down and see if they have any left. I'm with Maynard on a rebuild. However, I do believe you can safely play it for awhile, just do not leave the room or, indeed, the house for very long if it's plugged in, because something could fail. If your only interest is resale, leave it alone, but otherwise do not be concerned about a rebuild. Indeed make sure that you do. If can guarantee you that neither myself nor that amp is same sixty years later. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.