Dave A Posted January 4, 2020 Share Posted January 4, 2020 OK I have some xdat files that work just fine. However in the last two days while setting up new files for some 904's I can't get right channel output. I go back to the xdat file for my S-MWM's and all is well. I have looked high and low for some setting I am missing and I can'y find one. I can post some files here if that will help but hoping someone has had this issue before and can tell me what to look for. Going to reload the software next I guess. Quote Link to comment Share on other sites More sharing options...
Chris A Posted January 4, 2020 Share Posted January 4, 2020 Look to see if your routing of the input channel to output channels is still set correctly (i.e., Input 1 -->output 1 and 2, Input 2 --> output 3 and 4), and that you haven't muted the input channel. Quote Link to comment Share on other sites More sharing options...
Dave A Posted January 5, 2020 Author Share Posted January 5, 2020 I have the first three templates I can save and they behave right. From 4 to 6 the right channel does not work so I am certain I am missing a setting. I have not gone past 6 to try those figuring I need to fix the problem first. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.