Jump to content

Klipsch RC7 Center Tweeter Diaphragm Removal


Ryanfromaz

Recommended Posts

  • 2 weeks later...

Flatgrass, 

 

I ended up getting it off. I made it out to be a bigger deal than it was. First remove the screws just under the horn housing. Then you have to remove the glue that is holding the tweeter in the housing.I used a pair of needle nose pliers and ripped it out in pieces. It will take a bit of muscle to get it out, but it will come. Once it's out of the housing, then unscrew the four screws on the back side of the tweeter. Once that's off, you're good to go and you'll have access to the diaphragm. It should just lift right out. Be careful not to bent the new diaphragm when putting it in. As far as glue goes to put the tweeter back in, I would guess liquid nails. If someone has a better suggestion, please advise. 

 

 

IMG_0544.jpg

IMG_0546.jpg

IMG_0547.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...