Jump to content

Type A - 3636 Autoformer Connections?


Robbie010

Recommended Posts

Evening all,

 

I sat down this evening to layout the components for my Type A networks. Massive thank you to @mboxler for help with the parts (FOC no less), so I am using the 3636 (crites) autoformers and was just hoping someone can confirm the correct connections, as I’m not the best at reading schematics!
 

As I read it:

 

The negative input goes directly to pin 0

 

The positive input goes to pin 5 via the 13uf cap (which is in-turn connected to the positive connection for the tweeter via the 2uf cap)

 

Pin 4 is connected to the positive terminal for the squawker. 
 

Is this correct?

Link to comment
Share on other sites

15 hours ago, Robbie010 said:

Evening all,

 

I sat down this evening to layout the components for my Type A networks. Massive thank you to @mboxler for help with the parts (FOC no less), so I am using the 3636 (crites) autoformers and was just hoping someone can confirm the correct connections, as I’m not the best at reading schematics!
 

As I read it:

 

The negative input goes directly to pin 0

 

The positive input goes to pin 5 via the 13uf cap (which is in-turn connected to the positive connection for the tweeter via the 2uf cap)

 

Pin 4 is connected to the positive terminal for the squawker. 
 

Is this correct?

 

Just email or call Bob Crites and he can tell you quickly.  @BEC

Link to comment
Share on other sites

18 hours ago, Deang said:

What does he need to bother Bob for?

 

He may not need to bother Bob, but it couldn’t hurt.

 

Armed with a schematic and the 3636 connection scheme from Bob (attached above) I still emailed and spoke with Bob by phone for clarification.  A nice thing about Bob, he always makes you feel like you’re not bothering him, even when it must be a bother.

  • Like 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...