brownaye Posted February 27, 2020 Share Posted February 27, 2020 Horns only! No drivers included! See my other ad selling a pair of Faital HF200 drivers: Taken from a pristine pair of JBL 4670s that have only ever been used for home theater. They were mated to a pair of 2446J drivers, not included in this sale. Horns are super clean with no obvious scratches or other defects. $200/BO and we split shipping. If you're going to the New England Vintage Electronics Expo this Sunday March 1st in Nashua NH, I can hand them over in person. *Edited for clarity Quote Link to comment Share on other sites More sharing options...
brownaye Posted March 2, 2020 Author Share Posted March 2, 2020 open to offers Quote Link to comment Share on other sites More sharing options...
PrestonTom Posted March 2, 2020 Share Posted March 2, 2020 I am going suggest that you let folks know a bit about the horns (throat size, dispersion pattern etc). That will let them know if they can be used in their own set ups. Good luck, -Tom Quote Link to comment Share on other sites More sharing options...
babadono Posted March 2, 2020 Share Posted March 2, 2020 Add says mated to 2446J, so does this include the drivers? Quote Link to comment Share on other sites More sharing options...
brownaye Posted March 9, 2020 Author Share Posted March 9, 2020 2380a.pdf On 3/2/2020 at 4:57 PM, PrestonTom said: I am going suggest that you let folks know a bit about the horns (throat size, dispersion pattern etc). That will let them know if they can be used in their own set ups. Good luck, -Tom Good call, Tom! Attached is the jbl spec sheet and brief highlights below. 90x40 coverage ¹U . S . P at e nt N o . 4 , 3 0 8 , 9 3 2 . F o r e i g n p at e nt s p e n d i n g . Throw: Short Horizontal Coverage: Angle Degrees (-6 dB): 100 (+23. -23) Average Range: 500 Hz 16 kHz: Vertical Coverage Angle Degrees (-6 dB): 40 (+ 11, -11) Average Range: 2 kHz 16 kHz Directivity Factor (Q): 10.7 (+1.3, -2.51 Directivity Index (Di): 10.3 dB (+1.0, -1.4) Average Range: 1 kHz 16 kHz Usable Low-Frequency Limit: 400 Hz Minimum Recommended Crossover Frequency: 500 Hz Axial Pressure Sensitivity¹: 112 dB SPL, 1 W @ 1 m Construction: Molded structural foam (nominal 10 mm (0.38 in) wall thickness Overall Dimensions: Mouth Height: 279 mm [11 in] Mouth Width: 445 mm [17.5 in] Length: 236 mm [9.28 in] Mounting Dimensions: Rear Height: 235 mm [9.25 in] Rear Width: 400 mm [15.75 in] Baffle Cutout Required: (Front mounting only) Height: 238 mm [93/8 in] Width: 403 mm [157/8 in] Net Weight: 2.2 kg [6 lb] Quote Link to comment Share on other sites More sharing options...
brownaye Posted March 9, 2020 Author Share Posted March 9, 2020 On 3/2/2020 at 5:30 PM, babadono said: Add says mated to 2446J, so does this include the drivers? Thanks for catching that! I apologize for being unclear. The drivers are not included and i updated my original post. Price Lowered! $175 and we split shipping Quote Link to comment Share on other sites More sharing options...
Alan D Posted April 26, 2020 Share Posted April 26, 2020 Are they still for sale? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.