Jump to content

SOLD Yamaha CR-2040 120 WPC Vintage Receiver + bonus


RickFL

Recommended Posts

SOLD  No longer available.

Yamaha CR-2040 receiver(1979) with bonus Yamaha P-450 turntable. Will include some records as well. Receiver in near mint condition and working. Turntable works but need new cartridge. Hinge springs no longer work to hold up the cover.  I can demonstrate before purchase. $500. Located in West Palm Beach(Royal Palm Beach) Florida.

Specifications
Tuning range: FM, MW

Power output: 120 watts per channel into 8Ω (stereo)

Frequency response: 5Hz to 100kHz

Total harmonic distortion: 0.02%

Damping factor: 40

Input sensitivity: 0.1mV (MC), 2.5mV (MM), 120mV (line)

Signal to noise ratio: 86dB (MC), 95dB (MM), 100dB (line)

Output: 120mV (line)

Semiconductors: 14 x IC, 4 x FET, 102 x transistors, 31 x diodes, 9 x zener diodes

Dimensions: 580 x 167 x 407mm

Weight: 20.4kg

The Yamaha P-450 is a 2-speed, belt-drive, fully-auto turntable system with unique optimum mass, minimum resonance straight tonearm and convenient front panel operation.

Specifications
Drive system: belt drive

Motor: FG servo DC motor

Platter: 300mm die-cast aluminium, 0.7kg (including rubber mat)

Speeds: 33 and 45rpm

Signal to noise ratio: better than 70dB

Wow and flutter: less than 0.04% WRMS

Arm type: straight arm tube

Effective length: 222mm

Overhang: 16mm

Tracking force range: 0 to 3g

Offset angle: 23 degrees

Cartridge weight: 2.5 to 10g

Dimensions: 440 x 132 x 372mm

FullSizeRender (2).jpg

FullSizeRender (3).jpg

FullSizeRender (5).jpg

FullSizeRender (6).jpg

FullSizeRender (4).jpg

IMG_0795.JPG

  • Like 1
Link to comment
Share on other sites

Rick,

 

Great receiver and very fair price.

 

I had the earlier CR-2020, also very good.

 

But I hope yours does not have defective output meters like mine did... with my Klipsch speakers, they never moved. :wink:

 

Edit...

The meters will work, once you turn it up a bit. 😎

 

GLWS!!!

Link to comment
Share on other sites

13 hours ago, RickFL said:

Dear HPower,

The output meters do work. Thanks.

 

Hey Rick,

 

:wink:... Was suppose to infer a joke.

I am sure they work fine.

I was really trying to be sarcastic, our Heritage Klipsch are so bloody efficient the meters do not do too much dancing.

 

Again, great price, great receiver... someone will be very happy with this beautiful 2040!!!

 

 

 

Link to comment
Share on other sites

Great receiver! I have one myself, don't plan on selling mine though. One of my stereo friends saw that I had one, and gushed about how the 2040 model was his holy grail of receivers. It definitely has a cool look and a great flexible phono section. Good luck with your sale! 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...