Carlosrs Posted May 2, 2020 Share Posted May 2, 2020 Hello community!! Does anybody know if w=using the left and right inputs in the RSW-10Ds, can you daisy chain them?? I ask because in the RSW-15 the left and right inputs and outputs are all interconnected and can be used indistinctly. Thank you Quote Link to comment Share on other sites More sharing options...
jason str Posted May 2, 2020 Share Posted May 2, 2020 You can run a Y connector in the same fashion to branch off. 4 Quote Link to comment Share on other sites More sharing options...
wuzzzer Posted May 2, 2020 Share Posted May 2, 2020 1 hour ago, jason str said: You can run a Y connector in the same fashion to branch off. Yep. Use a y splitter. 1 Quote Link to comment Share on other sites More sharing options...
Carlosrs Posted May 2, 2020 Author Share Posted May 2, 2020 But would it be possible, I won't short anything out if connected directly through the inputs? Quote Link to comment Share on other sites More sharing options...
willland Posted May 2, 2020 Share Posted May 2, 2020 20 hours ago, Carlosrs said: Hello community!! Does anybody know if w=using the left and right inputs in the RSW-10Ds, can you daisy chain them?? Yes, the RSW10D will be at the end of the chain. Bill Quote Link to comment Share on other sites More sharing options...
babadono Posted May 8, 2020 Share Posted May 8, 2020 On 5/2/2020 at 1:37 PM, Carlosrs said: But would it be possible, I won't short anything out if connected directly through the inputs? It'll do something but not what you want. You will not 'short' (damage) anything. Quote Link to comment Share on other sites More sharing options...
babadono Posted May 8, 2020 Share Posted May 8, 2020 On 5/1/2020 at 5:10 PM, Carlosrs said: I ask because in the RSW-15 the left and right inputs and outputs are all interconnected I own 3 of these subs. The L and R inputs are not wired in parallel as you suggest. They are wired so the two inputs will sum. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.