R1CKSO Posted June 16, 2020 Share Posted June 16, 2020 Hello guys, I'm new to the forum I'm in desperate need for help, I have a pair of floorstanding RP-3's with the active subwoofer, I purchased them used about a month ago and love them to bits, sadly one of them had a weird sound to the subwoofer, I thought the speaker was blown, luckily found a replacement on eBay, installed it just to get the exact same sound, I said fine then, the culprit must be the amplifier board, after several youtube videos, found out that capacitors are prone to go bad and cause that, so I decided to refresh all transistors and main filter caps while in there, replaced all the parts, installed the board again and to my surprise the sound went away! it was working perfectly! about 30 seconds later large flash on the board, it was fried now everytime I power it, it blows the fuse, I'm not an electric expert and as I already replaced lots of components can't really address it or if it is even repairable, found a replacement plate on eBay but seller won't reply. I really want to fix my speaker I know I can use it as passive with the horn tweeter and middle driver but I really love the active subwoofer capability, so if anyone has a plate like this please let me know. Model is INDIGO 600063 Rev.13 or if anyone knows which other models used this board it could be very useful as well. Here are some pics of it: Quote Link to comment Share on other sites More sharing options...
wuzzzer Posted June 17, 2020 Share Posted June 17, 2020 Make a wanted to buy post down in the Garage Sale section. 👍 Quote Link to comment Share on other sites More sharing options...
R1CKSO Posted June 17, 2020 Author Share Posted June 17, 2020 11 hours ago, wuzzzer said: Make a wanted to buy post down in the Garage Sale section. 👍 Will do! Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.