Alexander Posted June 21, 2020 Share Posted June 21, 2020 Cleaned out and replaced the ferrofluid in the tweeters - then replaced it with new. I must say there is a difference, most notably in the klf-c7. It wasn't anywhere nearly as diffract to remove the old ferrofluid as it has been described by some. Just used post-it sticky notes as Crites mentions on his web site to clean out the gap, you would use say ten per 1” driver to get it all out. The replacement fluid came from PE & the kit also came with some blotting paper for cleaning, used one piece to check how clean the other method was and found nothing was left behind. Quote Link to comment Share on other sites More sharing options...
Alexander Posted June 21, 2020 Author Share Posted June 21, 2020 The actual order of events went like this: Cleaned out the ferrofluid in all three tweeters reusing OEM diaphragms – no discernible difference. Installed Crites Ti diaphragms in cleaned drivers – much brighter with more detail/clarity. Installed new ferrofluid with Crites Ti's – tamed the Ti's just a little while keeping the openness and detail/clarity. 1 Quote Link to comment Share on other sites More sharing options...
Coytee Posted June 21, 2020 Share Posted June 21, 2020 And the pictures are coming when??? 1 Quote Link to comment Share on other sites More sharing options...
Alexander Posted June 21, 2020 Author Share Posted June 21, 2020 9 hours ago, Coytee said: And the pictures are coming when??? Of dirty post-it notes and empty vials? Quote Link to comment Share on other sites More sharing options...
geoff. Posted June 21, 2020 Share Posted June 21, 2020 1 minute ago, Alexander said: Of dirty post-it notes and empty vials? ...another lost weekend... LOL! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.