jhouse55 Posted June 25, 2020 Share Posted June 25, 2020 Hello, I pulled these out of storage the other day and it totally slipped my mind that I don’t have the risers for these. Since I don’t see any out there on ebay, does anyone have any suggestions for sturdy feet to screw to the bottom using the same hole the risers screwed down to? i did see someone mention these from parts express way back but looking for other suggestions too. I plan on cleaning the bottom finish as well so I don’t want to scratch them up any more. https://www.parts-express.com/penn-elcom-9120-rubber-cabinet-foot-088-dia-x-031-h--260-7706 thanks in advance 1 Quote Link to comment Share on other sites More sharing options...
BadChile Posted June 25, 2020 Share Posted June 25, 2020 it would require either require adding a hole or simply skipping one screw, but I used the following Subwoofer Speaker foot on my KG4 pair: https://www.parts-express.com/subwoofer-speaker-foot-2-1-16-h-x-2-3-8-d-x-2-3-8-w-black--299-4038 $0.50 each, so $4.00 for eight of them is half what I paid last fall. 1 Quote Link to comment Share on other sites More sharing options...
MicroMara Posted June 25, 2020 Share Posted June 25, 2020 I may refer to this thread / topic . These speakerfeets can be used for all kind of Klipsch Speakers . Quote Link to comment Share on other sites More sharing options...
moray james Posted June 25, 2020 Share Posted June 25, 2020 a top quality four post stand of a height so the speaker is raised enough to place the centre of the mid horn at your seated ear level. The ones below are designed and manufactured by Noel Nolan of Skylan Stands in Calgary Alberta Canada. 1 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.