Jump to content

Klipsch Cornwall Information


Recommended Posts

CORNWALL:

  • Oct 1959: The Cornwall is introduced as the world's second commercially produced center speaker. A speaker with higher output capability than the Heresy was needed when used in three speaker arrays between Klipschorn’s. Component designations: Woofer EV 15WK, Midrange K-1000 Horn and University SAHF Driver, Tweeter K-77
  • Late 1959: Transition to the K-33-J Woofer (Jensen)
  • 1959 - 1961: Sporadic transition to the K-55-V mid-range driver (Atlas)
  • Jan 1963: The K-1000 diffraction type midrange horn was replaced with the exponential K-600 horn with a lower (600 Hz) cutoff.
  • Sept 1967: Transition to the K-33-M. The records are not clear as to the origin of this driver but it is believed to be an Eminence driver with an Alnico magnet.
  • Jan 1968: Transition to The K-33-P Woofer (CTS Paducah KY)
  • 1974: The horizontal version of the Cornwall is discontinued
  • 1974: K-56 mid-range driver (Electrovoice 1828) is used for a short period as a temporary replacement as the supply of K-55-V drivers was interrupted.
  • 1975: Transition to The K-33-B Woofer (CTS Brownsville TX)
  • 1975-1979: K-33-E and the K-33-B were used interchangeably.
  • 1979: The Eminence K-33-E woofer is used exclusively
  • June 1981: The updated B2 network, with steeper crossover slopes is phased in with no changes to the K-33-E, K-55-V and K-77-M drivers.
  • Oct 1981 - March 1983: The transition between four different iterations of the midrange driver from revolving sources occurs during this period. The original K-55-V was changed to a K-51-V (10/19/81) This marked the first time in the Cornwall's history that it used a driver set that differed from that of the Klipschorn. The K-51-V was then changed to the K-55-G (essentially a ceramic magnet version of the Atlas Alnico K-55-V). The K-55-G was then changed to the Hepner built K-52-H and finally the Klipsch built K-52-K.
  • Mar 1983: The B-3 network and the K-52 midrange driver starts to be used in this model.  Component designations were: Woofer Eminence K-33-E, Midrange K-57-K (K-600 Aluminum horn and K-52-K driver with the threaded snout), Tweeter K-77-M and B-3 network.



    Here is the link where I C&P that info from. Lots of information to help you know what you have.  
Link to comment
Share on other sites

3 hours ago, JohnA said:

There is a decoder ring in another forum (2 channel?), but I'm pretty sure those were made in 1984. 

Correct --the klipsch serial numbers codification charged , starting in 1984 -----for the serial numbers 8446545 and 8446546 -84  is the year -------44 could be the  44th week of the year 1984 ---------so these would be  production speakers made on the  last week of  October 1984 --  

Link to comment
Share on other sites

9 hours ago, Anthony Robinson said:

Thanks for the information. By the way I’ve owned almost every type of high end (Martin Logan, Quad, Magnepan, Meridian and vintage JBLs) speakers these are great sounding.  The Cornwalls, RP8000F and RP600M are my first Klipsch speakers and they are much better than I expected. 

the Cornwall cab is made of real wood ,  versus MDF -

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...