Jump to content
The Klipsch Audio Community
Sign in to follow this  
Yevgeniy

ProMedia all speakers hissing/crackling (this is not an un-researched post!)

Recommended Posts

I have ProMedia 4.1 which are over 10 years old.

 

Over time, speakers started developing hissing and crackling. I traced the issue to the preamp. It had some gunk/glue on the circuit board, which I cleaned off with electrical-grade isopropyl, and the issue went away.

 

Fast forward a couple/few years, and the noise is back! I checked the preamp, didn't see much accumulation, but cleaned it more anyway. No difference to the noise.

 

The noise comes from all 4 speakers and from the sub

 

  • When preamp was the source of the problem, I could hear change in crackling when i rotated the control knows.  Now knob rotation does not affect the noise
  • opened one of the speakers and checked all connections--all connections appear to be fine
  • Rotated all speakers on the same output and same speaker on all outputs
    • noise is always there
    • one of the channels (rear left) produces significantly higher level of noise than the rest
      • I suppose this means it could have two sources of noise or that there is no central source of noise, and all channels in the amp (or preamp) are impacted, with one of the channels in the amp impacted more than others
  • Unplugged the preamp, and I can hear the subwoofer is still making noise
    • this must mean either that the sub has two sources of noise, and the issue could still be in the preamp or the preamp is not the source of the noise
  • Opened the amp, checked all the connections in the amp and from the amp to the sub--everything is nice and snug
  • Examined the circuit boards in the amp--no signs of component wear and foreign matter

 

I am at a bit of a loss as to what to do next.

 

Has anyone experienced similar and/or has any suggestions?

Does anyone have experience testing individual components of the amp?

Any other basic tests I missed?

 

Thanks!

 

Edited by Yevgeniy
typos

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...