Jump to content
The Klipsch Audio Community
Sign in to follow this  
tswei

LaScala custom Center Channel

Recommended Posts

Hey gang.  Thought I would share the custom heritage channel I made for my LaScala based home theater.  This started when I refurbished a vintage pair of La Scalas (AA crossover).  After some excellent two channel listening, I decided to convert that room into a theater room and went about collecting 4 Academies for surrounds.  I got super lucky when a single LaScala (later model with a AK-3 Crossover) became available.  The problem I had was that the third 'Scala was too tall in the center position as for comfy viewing I wanted my screen lower.

 

After some research, consulting Mr. Crites, and enlisting the help of a friend with a woodworking shop, I scavenged the tweeter, midhorn, got the crossover Mr. Crites sells for his Cornscala design, estimated the surface area of the Cornsacala woofer and translated that to two Classic Woofers from PartsExpress, and designed a cabinet to hold everything w/ proper cabinet volume and can fit under the screen, and voila:  The LaSquata

IMG_0701.jpeg.fbe01db06af192595e289042eaad8aff.jpegIMG_6847.jpeg.de17624710194488cfdc5e60919f23f5.jpegIMG_1599.jpeg.f7cebc2afa52ef644947622caaa5811a.jpegIMG_1585.jpeg.9542a46b430a124b59628c14801ed286.jpeg

The results are beyond my expectations.  Wide dispersion, crystal clear clear voice tracks on movies, matching timbre and response.

 

I am powering this with an NAD AVR and added two HSU 15" subs.  It's quite epic, comparable to a commercial movie theater and the whole house shakes during LFE segments.

  • Like 5

Share this post


Link to post
Share on other sites

Really nice.  Would like to know more details.  Did Mr. Crites suggest a certain woofer?  d

Share this post


Link to post
Share on other sites

LaSquata - officially named by user tswei on October 4, 2020. (for posterity's sake, during the inevitable argument over who called this that first and subsequent forum searches for answers).

  • Like 2

Share this post


Link to post
Share on other sites
On 10/4/2020 at 12:44 PM, tswei said:

 

out of curiosity -----what size are the woofers - 6.5 inches ---or more

Share this post


Link to post
Share on other sites

The dimensions for the cabinet were 47 x 13 x 25.  We made it out of MDF, so its quite a beast to move around, but hey, I've got LaScalas so what is another large box in my front stage??  It looks relatively compact sitting under the screen.

 

For the woofers, I uses 2 X Dayton Audio DC250-8 10" Classic Woofer

 

My logic was to approximate the surface area of the original woofer and then wire them in parallel to match the impedance.

 

 

 

Share this post


Link to post
Share on other sites
On 10/5/2020 at 5:26 PM, Thaddeus Smith said:

LaSquata - officially named by user tswei on October 4, 2020. (for posterity's sake, during the inevitable argument over who called this that first and subsequent forum searches for answers).

Actually, this is a term I read somewhere on this forum years ago when I started thinking about this project.  Not sure who it was, but someone else had the same need (getting a center channel to match the big Heritage speakers).  I tried to connect w/ him/her but never heard back.  When I stumbled upon the single LsScala I just could not resist trying this.

  • Like 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...