joessportster Posted December 15, 2020 Share Posted December 15, 2020 I have a speaker its a 3 way speaker that comes with the idea that you use the included 2 way passive crossover for the dual concentric driver (mids and highs) and they expect you to use a bi-amp situation for powering the bass. I want to try and make it a full passive crossover so my question to those in the know is could I use something like this https://www.parts-express.com/eminence-pxb-250-low-pass-crossover-board-250-hz--290-612 and use jumpers off the speaker wire coming in to include this for low pass of 250HZ on the Bass. I would prefer to use a simple single inductor but have had no luck finding one that would cross me in the 200 HZ range (which is where I would prefer to low pass the bass) Thoughts anyone Quote Link to comment Share on other sites More sharing options...
STL Posted December 18, 2020 Share Posted December 18, 2020 It might be helpful if we knew the make/model of the speaker you are talking about. Does the bi-amping setup also expect the output going to the mids & high will have all the lower frequencies removed? I am thinking it likely does, and just adding what you linked won't get that. Also, those crossovers you found appear to be woefully overpriced IMO. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.