OO1 Posted April 14, 2021 Share Posted April 14, 2021 On 2/22/2021 at 6:19 PM, TexDrone said: What type of plywood are the HBRs made of? I understand it's Birch, it's 3/4" thick, and it appears to be 7 ply... but what about fillers, grade, etc etc. Thanks! , from what I recall , they were 3/4 plywood with a birch ply on both sides --- Quote Link to comment Share on other sites More sharing options...
TexDrone Posted April 14, 2021 Share Posted April 14, 2021 On 2/17/2021 at 8:14 PM, yamahaSHO said: I received my grille boards in and it seems the variation between my H1's and the guy who made these is enough to be off on the mid and tweeter. We took measurements and he's making me another set. What type of glue did you use to affix the grille fabric to the grille board? Do you have any tips/tricks/advice to share? thx Quote Link to comment Share on other sites More sharing options...
TexDrone Posted April 14, 2021 Share Posted April 14, 2021 3 minutes ago, RandyH000 said: , from what I recall , they were 3/4 plywood with a birch ply on both sides --- I was able to score some B/BB grade, veneer core, Baltic Birch in 3/4. The staples are showing, oh well... it gives them character... right? FWIW, the fellow who built these is an electrician by trade and this was his first attempt at building any sort of cabinets. 2 Quote Link to comment Share on other sites More sharing options...
OO1 Posted April 14, 2021 Share Posted April 14, 2021 5 minutes ago, TexDrone said: I was able to score some B/BB grade, veneer core, Baltic Birch in 3/4. The staples are showing, oh well... it gives them character... right? FWIW, the fellow who built these is an electrician by trade and this was his first attempt at building any sort of cabinets. Absolutely Beautiful , there is nothing that compares to BB for quality speakers ,it's expensive for sure but it 's gonna sound Fantastic - Quote Link to comment Share on other sites More sharing options...
billybob Posted April 14, 2021 Share Posted April 14, 2021 My Heresy is solid BB 3/4 ply period. Quote Link to comment Share on other sites More sharing options...
TexDrone Posted April 14, 2021 Share Posted April 14, 2021 7 minutes ago, RandyH000 said: Absolutely Beautiful , there is nothing that compares to BB for quality speakers ,it's expensive for sure but it 's gonna sound Fantastic - Thanks Randy, I will pass that compliment along. I already showed him some drawings for the La Scala and he is ready to try it. I bought the plywood in 5x5 sheets for about $45 per sheet, that was six weeks ago. 1 Quote Link to comment Share on other sites More sharing options...
OO1 Posted April 14, 2021 Share Posted April 14, 2021 Just now, TexDrone said: I bought the plywood in 5x5 sheets for about $45 per sheet, that was six weeks ago. 45$ per sheet of BB 5x5 , sounds like a great deal nowadays --- Quote Link to comment Share on other sites More sharing options...
TexDrone Posted April 14, 2021 Share Posted April 14, 2021 2 minutes ago, billybob said: My Heresy is solid BB 3/4 ply period. Does that mean BB on both sides? Or B on both sides? I asked about B/B (no footballs on either side) but they did not have any where I went. 1 Quote Link to comment Share on other sites More sharing options...
OO1 Posted April 14, 2021 Share Posted April 14, 2021 11 minutes ago, TexDrone said: Does that mean BB on both sides? Or B on both sides? I asked about B/B (no footballs on either side) but they did not have any where I went. did you ever ask for APPLEPLY - 4X8 Quote Link to comment Share on other sites More sharing options...
billybob Posted April 14, 2021 Share Posted April 14, 2021 4 minutes ago, TexDrone said: Does that mean BB on both sides? Or B on both sides? I asked about B/B (no footballs on either side) but they did not have any where I went. Have not been inside but BB with no veneer, unless am having my eyes deceive me. Quote Link to comment Share on other sites More sharing options...
TexDrone Posted April 14, 2021 Share Posted April 14, 2021 1 minute ago, RandyH000 said: did you ever ask for APPLEPLY - 4X8 I did not. I just asked for the best quality veneer core. I showed them what I was trying to duplicate and this was the best they had. I need to go to some of the other local lumber yards. Quote Link to comment Share on other sites More sharing options...
TexDrone Posted April 14, 2021 Share Posted April 14, 2021 2 minutes ago, billybob said: Have not been inside but BB with no veneer, unless am having my eyes deceive me. I guess I would have to see it. Is it just solid lumber? Quote Link to comment Share on other sites More sharing options...
billybob Posted April 14, 2021 Share Posted April 14, 2021 Just now, TexDrone said: I guess I would have to see it. Is it just solid lumber? To my eyes yes. Maybe I should just post the numbers on them since I do not know the year they were made. They are not the decorator type though. Quote Link to comment Share on other sites More sharing options...
OO1 Posted April 14, 2021 Share Posted April 14, 2021 6 minutes ago, TexDrone said: I did not. I just asked for the best quality veneer core. I showed them what I was trying to duplicate and this was the best they had. I need to go to some of the other local lumber yards. Appleply is Made in the USA ----- 4 x 8 sheets is the standard size - 13 ply-- whereas BB is available in 5X5 or 4x8 -also 13 ply -- Quote Link to comment Share on other sites More sharing options...
TexDrone Posted April 14, 2021 Share Posted April 14, 2021 3 minutes ago, RandyH000 said: Appleply is Made in the USA ----- 4 x 8 sheets is the standard size - 13 ply-- whereas BB is available in 5X5 or 4x8 -also 13 ply -- Interesting. I will have to look around. Quote Link to comment Share on other sites More sharing options...
yamahaSHO Posted April 15, 2021 Author Share Posted April 15, 2021 4 hours ago, TexDrone said: What type of glue did you use to affix the grille fabric to the grille board? Do you have any tips/tricks/advice to share? thx I have the new boards in... I had him cut two sets. One is Masonite and the other is 1/4" MDF (with veneer on both sides). I think I am going to do the MDF as I like the thicker board and will be more like the current Heresy's where the grilles stick out a little. That said, I bought a staple gun and some 1/8" staples. I tested on some spare wood with my grille material and I think this will be perfect. I need to attach the magnets and then paint the boards black, then I can wrap. I will have to measure and make marks to ensure I keep the lines straight on the material. If they are not straight, it will be noticeable. I may try to get this done this weekend... Currently working on a lot of projects. Spring brings energy. The guy who made my grille boards is doing another one for my center channel/mantle speaker as well. Also with 1/4" MDF. I am looking forward to that over what I did because he's got a CNC for this stuff. 4 hours ago, TexDrone said: I was able to score some B/BB grade, veneer core, Baltic Birch in 3/4. The staples are showing, oh well... it gives them character... right? FWIW, the fellow who built these is an electrician by trade and this was his first attempt at building any sort of cabinets. Looks good from the pictures! Quote Link to comment Share on other sites More sharing options...
TexDrone Posted April 15, 2021 Share Posted April 15, 2021 19 hours ago, yamahaSHO said: I have the new boards in... I had him cut two sets. One is Masonite and the other is 1/4" MDF (with veneer on both sides). I think I am going to do the MDF as I like the thicker board and will be more like the current Heresy's where the grilles stick out a little. That said, I bought a staple gun and some 1/8" staples. I tested on some spare wood with my grille material and I think this will be perfect. I am curious how the staples work out for you. I bought some material from Crites to put over the Masonite boards. I have looked at some other H1 grilles and the cloth appears to be glued on. My H3s almost look like they used a super strong double side tape. Quote Link to comment Share on other sites More sharing options...
TexDrone Posted April 17, 2021 Share Posted April 17, 2021 On 2/17/2021 at 8:41 PM, yamahaSHO said: Until I have my other building built this year... So, this and my other factory.mp4 Quote Link to comment Share on other sites More sharing options...
TexDrone Posted April 17, 2021 Share Posted April 17, 2021 Here are a few more photos of the homemade H1 cabinets, sorry these are all out of order. I tried to give credit to the builder, but he does not like having his photo taken. Quote Link to comment Share on other sites More sharing options...
TexDrone Posted April 20, 2021 Share Posted April 20, 2021 Grilles covered, Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.