Lbk 49 Posted January 13 Got some free 20 1/8 by 53 by 11/16 walnut veneer panels with 1.25 solid walnut edges off craigslist. Started cutting outside panels for 2 exodus anarchy subwoofers today. Would it be safe to use these for the inside panels? Plans state 1/2 inch panels these are 3/16 over. There are 5 inside panels so that's 15/16 total. Do I need to buy some 1/2 plywood for inside panels or can the over sized walnut panels be use safely. Thanks! Quote Share this post Link to post Share on other sites
DizRotus 9033 Posted January 13 It’s not clear to me if the wood is veneered plywood. In any case, I would not do it. The wood is free, but your time is not. After investing your time and money on something that should last for decades, is it worth a few dollars to alter the internal dimensions and end up with something not designed and modeled by Lil’ Mike. YMMV Quote Share this post Link to post Share on other sites
Lbk 49 Posted January 13 1 minute ago, DizRotus said: It’s not clear to me if the wood is veneered plywood. In any case, I would not do it. The wood is free, but your time is not. After investing your time and money on something that should last for decades, is it worth a few dollars to alter the internal dimensions and end up with something not designed and modeled by Lil’ Mike. YMMV Yes sorry veneered plywood, plywood looks to be quality and that's why I was considering using it, good points. Quote Share this post Link to post Share on other sites
