TexDrone Posted February 6, 2021 Share Posted February 6, 2021 For those of you who are setup for tri-amp, what do your speaker connections on the exterior of the cabinet look like? Does anyone make a one piece 'cup' with three pairs of binding posts, instead of just two? Thanks Quote Link to comment Share on other sites More sharing options...
Thaddeus Smith Posted February 6, 2021 Share Posted February 6, 2021 Not seeing options for that on parts-express. You could get by with just 3 pair of binding posts and holes through the cabinet, ditch the cup/plate. I don't think there's many folk here who tri-amp into a single speaker. Most of us with 3--way setups have individual cabinets per component being amplified. Quote Link to comment Share on other sites More sharing options...
TexDrone Posted February 7, 2021 Author Share Posted February 7, 2021 6 hours ago, Thaddeus Smith said: Not seeing options for that on parts-express. You could get by with just 3 pair of binding posts and holes through the cabinet, ditch the cup/plate. I don't think there's many folk here who tri-amp into a single speaker. Most of us with 3--way setups have individual cabinets per component being amplified. Thanks, just making sure I was not missing some special part that is only sold at one place. Quote Link to comment Share on other sites More sharing options...
Wirrunna Posted February 7, 2021 Share Posted February 7, 2021 You could try https://www.madisoundspeakerstore.com/yung-binding-posts/posts-hg-postr-binding-post-red/ Looks like it bolts through a panel and accepts banana plugs. I tri-amped K-Horns and just used a terminal block in the top hat. Quote Link to comment Share on other sites More sharing options...
The Dude Posted February 8, 2021 Share Posted February 8, 2021 You could try https://www.madisoundspeakerstore.com/yung-binding-posts/posts-hg-postr-binding-post-red/ Looks like it bolts through a panel and accepts banana plugs. I tri-amped K-Horns and just used a terminal block in the top hat.You could easily build something with these.If not SMD offers one for 4 speakers https://www.amazon.com/SMD-Channel-Speaker-Terminal-Stainless/dp/B01ATQSV5U/ref=mp_s_a_1_9?adgrpid=64569626388&dchild=1&gclid=Cj0KCQiAvP6ABhCjARIsAH37rbQ7rirSI625BArpFunRNko8a36Ax0pcdGcz5bz0QVTRYGJnpYhEEegaAoZqEALw_wcB&hvadid=274720114706&hvdev=m&hvlocphy=9024602&hvnetw=g&hvqmt=e&hvrand=5898766779438441258&hvtargid=kwd-369474163173&hydadcr=19887_9672012&keywords=smd+speaker+terminal&qid=1612742915&sr=8-9&tag=hydsma-20Sent from my SM-G986U using Tapatalk Quote Link to comment Share on other sites More sharing options...
TexDrone Posted February 8, 2021 Author Share Posted February 8, 2021 18 hours ago, The Dude said: You could easily build something with these. If not SMD offers one for 4 speakers That's interesting, they are made in 2 speaker and 4 speaker... but not the 3 speaker configuration that I need. 😅 Yes, I think building a plate of some sort is the way to go. Quote Link to comment Share on other sites More sharing options...
NBPK402 Posted February 10, 2021 Share Posted February 10, 2021 I run Speakons...I use a 4 wire one for my 2 way active and they make a 8 wire one for a 4 way. They are super simple to hookup and disconnect, but a bit of a pain to wire as a 4 way. Sent from my SM-T830 using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.