OO1 Posted February 8, 2021 Share Posted February 8, 2021 2 hours ago, The Dude said: Same issue, since all of our work was on preset 3, the amp defaults to preset 3 when the right side config is loaded and then the high frequency drops off. Weird. are the results the same on both drivers ? Quote Link to comment Share on other sites More sharing options...
babadono Posted February 8, 2021 Share Posted February 8, 2021 Late to this..... so the copper conductor has come out of the kapton(or similar) insulator in the lead(s) to the voice coil? That ain't right. Sure its not shorting to something when assembled? Quote Link to comment Share on other sites More sharing options...
The Dude Posted February 8, 2021 Author Share Posted February 8, 2021 are the results the same on both drivers ?No right side measures fine. It has to be something odd with the preset 3 settings on the left amp.Sent from my SM-G986U using Tapatalk Quote Link to comment Share on other sites More sharing options...
The Dude Posted February 8, 2021 Author Share Posted February 8, 2021 Late to this..... so the copper conductor has come out of the kapton(or similar) insulator in the lead(s) to the voice coil? That ain't right. Sure its not shorting to something when assembled?Correct and something I consider, even realized the metal eye connection for the terminal was touching the metal body of the driver housing. I added some electrical tape as a barrier, it made no difference. Luckily adding the tape hasn't had any affects to the sound. Now that ive created a whole new filter, jamming tunes again. Just need to go back and eq the peaks a bit.Sent from my SM-G986U using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.