rockhound Posted April 3, 2021 Share Posted April 3, 2021 My favorite Klipsch home speaker I have a pair just like these and as @jimjimbo said the are superb, @Smokinone your gonna love em. Quote Link to comment Share on other sites More sharing options...
OO1 Posted April 3, 2021 Share Posted April 3, 2021 3 hours ago, Smokinone said: Used a private courier. baco99 on another forum was offering pony express for basically a coast to coast, both ways, run. Everything came together on this better than we could have planned. can you elaborate ---please --- cost -- how to reach this guy------tx Quote Link to comment Share on other sites More sharing options...
Chorus1 Fan Posted April 4, 2021 Share Posted April 4, 2021 On 3/13/2021 at 8:30 PM, Lbk said: Easily reversible, PE has that 4" by 12"port you can cut down. Just make sure you measure before you purchase if you go this route. It won't fit (tried it) the factory opening is a little too small. But these will: https://www.michaels.com/white-shipping-tube-by-celebrate-it/M10323409.html?dwvar_M10323409_size=4" x 10"&dwvar_M10323409_color=White Detailed info on page 3 of this thread: 1 Quote Link to comment Share on other sites More sharing options...
Lbk Posted April 4, 2021 Share Posted April 4, 2021 19 minutes ago, Chorus1 Fan said: It won't fit (tried it) the factory opening is a little too small. But these will: https://www.michaels.com/white-shipping-tube-by-celebrate-it/M10323409.html?dwvar_M10323409_size=4" Detailed info on page 3 of this thread: I might have to try those, I remember trying different things from HD and only got frustrated. Thanks for posting link! 1 Quote Link to comment Share on other sites More sharing options...
Chorus1 Fan Posted April 4, 2021 Share Posted April 4, 2021 10 minutes ago, Lbk said: I might have to try those, I remember trying different things from HD and only got frustrated. Thanks for posting link! I tried EVERYTHING, & these are the best fit by far. But here's how: To get them TIGHT (a "pressed in" fit) do this: 1. Install finished tube in one at time from the inside out 2. leave an extra 3-4 inches of it sticking out through the hole 3. wrap as much electrical tape as needed on each one & test/repeat individually until it's hard to get back thru (some took 1 wrap, others took 3-4 complete wraps) 4. wiggle & gently press it back in to get a final "flush" fit & have it as tight fitting as possible 5. hot-glue the joint on the inside of the speaker where the port meets the back of the front motorboard wood. This makes em rock solid! 1 Quote Link to comment Share on other sites More sharing options...
Lbk Posted April 4, 2021 Share Posted April 4, 2021 10 hours ago, Chorus1 Fan said: I tried EVERYTHING, & these are the best fit by far. But here's how: To get them TIGHT (a "pressed in" fit) do this: 1. Install finished tube in one at time from the inside out 2. leave an extra 3-4 inches of it sticking out through the hole 3. wrap as much electrical tape as needed on each one & test/repeat individually until it's hard to get back thru (some took 1 wrap, others took 3-4 complete wraps) 4. wiggle & gently press it back in to get a final "flush" fit & have it as tight fitting as possible 5. hot-glue the joint on the inside of the speaker where the port meets the back of the front motorboard wood. This makes em rock solid! Good info, thanks. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.