Jump to content

FS: Spendor SP1/2R2 Loudspeakers - Sold


michaelwjones

Recommended Posts

You read the tag line correctly. Try this pair of Spendor SP1/2R2 speakers for $100.  Two, but one is dead. We think it’s the low frequency driver voice coil, but could also be the crossover. After attempting to work with the dealer, tech & distributor for nearly a year to repair, I have reached my limit & wash my hands of it. The other speaker is fine and if nothing else, would make a great center speaker.

 

Cosmetically, they are in great shape.The cabinetry is ebony veneer with the usual minor dings snd small scratches you get over 7 years. The grills are snag & pill free.The bases are a bit rougher from resting on metal  stands and movement. Frankly, they’d sit nicely in a living room.They are already packed in the factory boxes ready to go.

 

Given the 40 pounds per speaker, I’d suggest pick up (I’m south of Nashville TN), but they can be shipped anywhere of you pay the freight. The specs are below:

 

F Drive Units: 19mm soft dome, ferrofluid cooled (0.75") Scanspeak 2008
38mm soft dome, shaded pole (1.5") Scanspeak 3806

LF Drive Unit: 200mm polypropylene cone (8") 40 mm voice coil (1.5")

Impedance: 8 ohms nominal

Sensitivity: 88 dB for 1 watt at 1 meter

Maximum SPL 104 dBA at 1 meter

Crossover Points: 3kHz, 13 kHz

Frequency Response: 45 Hz to 20 kHz (+/- 3dB)

Pair Matching: Within 1dB

Power Handling: 100 watts

Cabinet Dimensions: 635mm x 300mm x 300mm (25" x 12" x 12")

Cabinet Weight: 18 kilos (40 lbs.)

 

Please feel free to email any questions. Thanks.

Spendor - 1.jpeg

Spendor - 2.jpeg

Spendor - 4.jpeg

Spendor - 3.jpeg

Link to comment
Share on other sites

Hi Michael-

I would like to buy these speakers.  I am an electronics tech of sorts, so I should have a good chance of fixing these.  Please send me an email at mramunds@gmail.com.  I can't send private messages yet.  Thanks for your attention in this matter...Regards,

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...