mopardave Posted May 9, 2021 Author Share Posted May 9, 2021 9 hours ago, RandyH000 said: I have auditioned quite a few very expensive Class A amps ---------the best are made by Classe in Montreal Quebec , Canada Whats the price on these? Quote Link to comment Share on other sites More sharing options...
Bubo Posted May 9, 2021 Share Posted May 9, 2021 10 hours ago, Fido said: I like a holistic approach to improving sound enjoyment. Better speakers, better amplification, better turntable, better DAC, better streamer/ source etc. It all adds up and can be fun as you systematically improve your audio setup over time. It seems it takes some time to know the sound that turns ones mind on. Agree, it is a game of 1% improvements The improvements are eliminating underperformers There is no substitute for great source recordings. 16GA lamp cord is not an under-performer, coax will measure better at frequencies a bat may be able to hear. Gold plated or exotic metals terminals are no better than nickle steel, after years you may have to clean some oxidation, so what. Old style spring loaded clamp connectors are good enough, possibly more secure and you don't need the expensive connectors. How often do you pull the cables off the amp ? If you can't measure it, does it exist ? Slew rate and TIM were audible, measurable problems; identifying the cause and cure took some work.... 4 Quote Link to comment Share on other sites More sharing options...
mopardave Posted May 9, 2021 Author Share Posted May 9, 2021 7 minutes ago, Bubo said: I would use McIntosh as a benchmark They do everything in house. They sell via distributors. if an equivalent costs more, Why ? Cary, yes Ayon, yes Allnic, no That's really part of the question, why do they cost so much more, thousands more and i doubt they sound much better than an amp costing 40,000 dollars less. I have looked at the Toolshed amps as well. I really like the looks and the reviews seem pretty good, but not sure if 10w would be enough to drive the bass as low as i like it at times. $5500 is a bit over my budget as well. Anyone have any experience with the Toolshed amps? Quote Link to comment Share on other sites More sharing options...
Bubo Posted May 9, 2021 Share Posted May 9, 2021 13 minutes ago, mopardave said: That's really part of the question, why do they cost so much more, thousands more and i doubt they sound much better than an amp costing 40,000 dollars less. I have looked at the Toolshed amps as well. I really like the looks and the reviews seem pretty good, but not sure if 10w would be enough to drive the bass as low as i like it at times. $5500 is a bit over my budget as well. Anyone have any experience with the Toolshed amps? Scope of problem A. I want an airplane. Everything with wings is now on the table as a solution. B. I need a plane to fly 150 miles, 2 passengers, daylight, fair weather only, no cargo in excess of 300lbs, needs to operate down to zero F, grass landings and take off, needs to hold enough fuel for the round trip. No mechanics near by, so low maintenance. Used low hours is OK. Now you have a problem that can be solved....... Quote Link to comment Share on other sites More sharing options...
mopardave Posted May 9, 2021 Author Share Posted May 9, 2021 4 minutes ago, Bubo said: Agree, it is a game of 1% improvements The improvements are eliminating underperformers There is no substitute for great source recordings. 16GA lamp cord is not an under-performer, coax will measure better at frequencies a bat may be able to hear. Gold plated or exotic metals terminals are no better than nickle steel, after years you may have to clean some oxidation, so what. Old style spring loaded clamp connectors are good enough, possibly more secure and you don't need the expensive connectors. How often do you pull the cables off the amp ? If you can't measure it, does it exist ? Slew rate and TIM were audible, measurable problems; identifying the cause and cure took some work.... 4 minutes ago, Bubo said: Agree, it is a game of 1% improvements The improvements are eliminating underperformers There is no substitute for great source recordings. 16GA lamp cord is not an under-performer, coax will measure better at frequencies a bat may be able to hear. Gold plated or exotic metals terminals are no better than nickle steel, after years you may have to clean some oxidation, so what. Old style spring loaded clamp connectors are good enough, possibly more secure and you don't need the expensive connectors. How often do you pull the cables off the amp ? If you can't measure it, does it exist ? Slew rate and TIM were audible, measurable problems; identifying the cause and cure took some work.... I agree, it will be small improvements at a time. I am looking at getting back into vinyl and looking at the EAT turntables. Still using my old modded Sony C333ES super audio changer for feeding audio to my Chinese amps. Really thinking more serious about the Ayon amps as well. I would think these two items would make some nice improvements. Quote Link to comment Share on other sites More sharing options...
mopardave Posted May 9, 2021 Author Share Posted May 9, 2021 2 minutes ago, Bubo said: Scope of problem A. I want an airplane. Everything with wings is now on the table as a solution. B. I need a plane to fly 150 miles, 2 passengers, daylight, fair weather only, no cargo in excess of 300lbs, needs to operate down to zero F, grass landings and take off, needs to hold enough fuel for the round trip. No mechanics near by, so low maintenance. Used low hours is OK. Now you have a problem that can be solved....... Yes, i understand. Looking at all options here for sure. 1 Quote Link to comment Share on other sites More sharing options...
Bubo Posted May 9, 2021 Share Posted May 9, 2021 17 minutes ago, mopardave said: I agree, it will be small improvements at a time. I am looking at getting back into vinyl and looking at the EAT turntables. Still using my old modded Sony C333ES super audio changer for feeding audio to my Chinese amps. Really thinking more serious about the Ayon amps as well. I would think these two items would make some nice improvements. I love Design, it is art But you can't hear it.... A high end used Denon or any of the Dual turn tables from 20-50 years ago are hard to beat Both produced from economies that were bombed out and oriented to making consumer products to earn dollars. Convert the old prices to gold at $35oz, then reconvert to current exchange rates. These are, were, $3k-$4K products and worth every penny. For new products, the Audio Technica, Panasonic knock offs are hard to beat, but fully manual. 1 Quote Link to comment Share on other sites More sharing options...
Bubo Posted May 9, 2021 Share Posted May 9, 2021 32 minutes ago, mopardave said: Yes, i understand. Looking at all options here for sure. Ayon Spirit The specs section is missing the specs like SN, THD, freq response at power etc. Why do you need 70W ? The attraction of tube is simplicity, above 30W it's less simple. The greatest minds in the world came up with 300b tube amps and horn loaded speakers at WECO They invented sound reproduction that was intelligible and amplified for a theater. They invented sound that audiences were willing to pay to hear, over and over again. Quote Link to comment Share on other sites More sharing options...
Shakeydeal Posted May 9, 2021 Share Posted May 9, 2021 If you want an option that doesn’t break the bank look at Aric Audio. I just bought his Super KT88/120 SE and it is one of the best sounding amps I have owned. Made in the USA with premium parts and PTP wiring, no circuit boards. Aric Kimball is very accessible and always eager to help. Highly recommended. Shakey Quote Link to comment Share on other sites More sharing options...
mopardave Posted May 9, 2021 Author Share Posted May 9, 2021 39 minutes ago, Bubo said: Ayon Spirit The specs section is missing the specs like SN, THD, freq response at power etc. Why do you need 70W ? The attraction of tube is simplicity, above 30W it's less simple. The greatest minds in the world came up with 300b tube amps and horn loaded speakers at WECO They invented sound reproduction that was intelligible and amplified for a theater. They invented sound that audiences were willing to pay to hear, over and over again. I just read the review on the Ayon spirit v. I believe 70w max as well. Don't really need 70w, but nice to have some reserve power to reproduce the lower bass notes was my thought. The way i understand it, the Ayon is wired a bit different than your tipical tube amp for a cleaner sound. Sounds like SET, but with lots of power. Gonna have to step up to the pay window with this amp at $6000.00 thou. Quote Link to comment Share on other sites More sharing options...
OO1 Posted May 9, 2021 Share Posted May 9, 2021 1 hour ago, mopardave said: Whats the price on these? about 20k$ for a pair of Monoblocks -----35 wpc in Pure Class A - 8 Ohms Quote Link to comment Share on other sites More sharing options...
The Dude Posted May 9, 2021 Share Posted May 9, 2021 It is only worth $35K, if someone is willing to pay 35K. Though not the 75th anniversary, I know of 2 sets of the new Jubilees that have been ordered. Some people are willing to pay.Sent from my SM-G986U using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
OO1 Posted May 9, 2021 Share Posted May 9, 2021 any idea of the price range Quote Link to comment Share on other sites More sharing options...
The Dude Posted May 9, 2021 Share Posted May 9, 2021 Subjective question with a million subjective answersTo many amp/speaker combos, even at 38, I'd need to retire now to just hear them all.Sent from my SM-G986U using Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
mopardave Posted May 9, 2021 Author Share Posted May 9, 2021 1 minute ago, RandyH000 said: any idea of the price range Just looking right now, but looking to pull the trigger in the fall or around christmas. I would like to keep it under $3000, but depends how much i want it. $6000 may not be out of question. Quote Link to comment Share on other sites More sharing options...
The Dude Posted May 9, 2021 Share Posted May 9, 2021 I think for $35k I would start with paying someone to acoustically treat my room, eq the system, then I would look at all the 4k and under amps iv wanted to try. If possible maybe chase an high end active crossover and try a pair of those MC303s.Sent from my SM-G986U using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
mopardave Posted May 9, 2021 Author Share Posted May 9, 2021 30 minutes ago, Shakeydeal said: If you want an option that doesn’t break the bank look at Aric Audio. I just bought his Super KT88/120 SE and it is one of the best sounding amps I have owned. Made in the USA with premium parts and PTP wiring, no circuit boards. Aric Kimball is very accessible and always eager to help. Highly recommended. Shakey Those look to be nice as well. They kind of remind me of the NOSvalves amp craig used to build. He used to live near me and an old friend. He might be able to build me a pair if i wanted that style/design. Quote Link to comment Share on other sites More sharing options...
mopardave Posted May 9, 2021 Author Share Posted May 9, 2021 1 minute ago, The Dude said: I think for $35k I would start with paying someone to acoustically treat my room, eq the system, then I would look at all the 4k and under amps iv wanted to try. If possible maybe chase an high end active crossover and try a pair of those MC303s. Sent from my SM-G986U using Tapatalk $35k is just plain crazy. 1 Quote Link to comment Share on other sites More sharing options...
OO1 Posted May 9, 2021 Share Posted May 9, 2021 Just now, mopardave said: Just looking right now, but looking to pull the trigger in the fall or around christmas. I would like to keep it under $3000, but depends how much i want it. $6000 may not be out of question. The used market is where I would concentrate for any high end amplifier-preamp - original buyers usually take care of their gear 2 Quote Link to comment Share on other sites More sharing options...
Bubo Posted May 9, 2021 Share Posted May 9, 2021 1 hour ago, The Dude said: To many amp/speaker combos, even at 38, I'd need to retire now to just hear them all. Sent from my SM-G986U using Tapatalk I was fortunate to have a Friend who managed a successful stereo store, back in the 70s-80s when there were plenty of chains and stand alone operations competing for the business. After a few months of listening on and off, I purchased Heresy 1s and a Yamaha CR20202 Receiver. By comparing blind to the Mc gear and Klipsch entire product line. Six months later I got a call from my friend telling me if I wanted a totl Mac stack, bring $1,200 and hurry over. So I took my money saved for a car and hurried over. A customer wanted to sell his 6 month old gear for less than half, so I bought it. The store didn't take trade ins. Few months later my friend was the top Klipsch store either on the East Coast or US Either way Klispch sold him a pair of LaScalas at cost, I got them new. I have never looked back no matter how many systems I sample. The matched totl for the store was Klipsch and McIntosh, they had done the work for me. Sadly, big box stores killed the business along with surround. Without the value of the stores competing by adding integration value, it's much harder for new buyers IMHO. McIntosh and Klipsch are still both stodgy and effective solutions. Baring a total collapse of civilization, I may begin playing with some simple tube solutions in a few months, something to tinker with. I have around 20 solid state rebuilds to do first. I salute the Apple I-Pod and I-phone with $2 ear buds for binging: stereo, headphones and vinyl with large speakers back from the brink of extinction... 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.