Jump to content

Convert Cornwall III Xover to Hersey III


Recommended Posts

Hello, hope everyone is staying safe and healthy.

 

I need to convert my CW3 Crossover network to H3. The CW3 kit was originally bought  to experiment with my cornscala. Couple of years ago  I upgraded my Hersey 1.5 to H3, with CW3 Xover and K28, K53Ti and K107 Tweeters. And for a while I used a Autoformer to lower the mid and tweeter section by 3db. Now instead, I am using a RME DAC's EQ to lower mid and tweeter by 3db. But this only solves digital sources.

 

I would instead like to make the network a proper H3 network. I checked with Michael Crites, he does not have the schematics of either.

 

If any of you have schematics of CW3 and H3 and since both the H3 and CW3 are no longer in current production, could you share them ? 

 

BTW, I am in the process of building a top section cabinet (trapezoid) as I like the higher soundstage with the mid and tweeter on top of the cabinet.

H1.5-To-H3.thumb.jpeg.5b34c0bd14cb06732f3c16064eecc367.jpeg

Thanks & Cheers

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...