Aung Posted June 21, 2021 Share Posted June 21, 2021 Hi all, I’m new here. Just got the fives and trying to update firmware for Bass Cut mode EQ but without success. Any suggestion? thanks in advance Quote Link to comment Share on other sites More sharing options...
buckaroo Posted June 23, 2021 Share Posted June 23, 2021 Here is a thread dealing with the topic: The update works but there is a "patience" element required in getting it to deploy... Quote Link to comment Share on other sites More sharing options...
techguy52 Posted June 24, 2021 Share Posted June 24, 2021 Looks like there is a new firmware version available, Version: 5.8.0 released: 06/11/2021. Just follow these steps; https://www.klipsch.com/firmware?product=115490 Pre-requisites You will need a USB thumb drive to complete the update. Installation Click the Download Firmware button. Extract the contents of the ZIP file. Make sure there are no existing files on the thumb drive. It must be blank to perform the update. Copy the three extracted files to the root directory of the USB thumb drive. Unplug power from The Fives. Insert the USB thumb drive into the back of The Fives. Reconnect AC power to The Fives. After a few moments, the update cycle will start. You will see various LEDs lighting up. This takes about 2 minutes. Do not interrupt the process. When the process is complete, the lights will stop flashing, and you should be able to change the volume. Remove the USB thumb drive from The Fives. The update is complete. Quote Link to comment Share on other sites More sharing options...
buckaroo Posted June 24, 2021 Share Posted June 24, 2021 The above post is the same update referenced in the thread in my previous post. The update works, but most users report making multiple efforts before success. Make sure there are no other files on your flash drive other than the three (.bin) files yielded from the extraction of the zip. They should not be in a separate folder on your flash drive. View the video (referenced in the linked thread above) to watch the correct light display that a successful install looks like....that was helpful for me. Quote Link to comment Share on other sites More sharing options...
OO1 Posted June 24, 2021 Share Posted June 24, 2021 On 6/21/2021 at 11:15 AM, Aung said: Hi all, I’m new here. Just got the fives and trying to update firmware for Bass Cut mode EQ but without success. Any suggestion? thanks in advance what steps did you do so far , did you format the blank thumb drive prior to downloading the new firmware -------https://www.klipsch.com/firmware?product=115490 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.