mark heija Posted July 7, 2021 Share Posted July 7, 2021 Hello KAC Folks, My first speaker purchase in the 70's was the AR-11, not long after I discovered the LaScala. I've loved both pairs ever since. Recently I've embarked on my first crossover rebuild... I have a bit of soldering experience and used a meter to test speakers when I rebuilt four salvaged LaScalas. (loved the pre-fab crossovers from Bob Crites, RIP) I'm more of a woodworker and have the cabinets already looking like new. I was told I would probably need to replace some (or all) of the capacitors and these are the assumed current component ratings (I see five capacitors so I'm not sure about this list - a later AR-11 version? -some in parallel?): One 10uF One 40uF One 50uF One 72uF I do see these numbers on a schematic I found online. I'm hoping to get some advice on how to check the status of these parts and how to proceed. Photo attached. Also, included a photo of the plugs I cut to fill the screw holes... had 'em up on steel brackets with some added fastener security... living here in earthquake country! Thanks for any help, Mark Quote Link to comment Share on other sites More sharing options...
veloceleste Posted July 7, 2021 Share Posted July 7, 2021 . Quote Link to comment Share on other sites More sharing options...
mark heija Posted July 7, 2021 Author Share Posted July 7, 2021 Hello veloceleste, Thanks for the lead, I'll be checking them out. -Mark I'll post some updates as things progress Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.