DVDMike Posted July 22, 2021 Share Posted July 22, 2021 Someone put me out of my misery here please. I’m trying to gain access to the bass bin crossover in my ak3 1992 klipschorn. I took off the input panel but that doesn’t provide enough room. i can tell that the crossover is mounted inside to the right of the input connector box. That box is connected to a 2’x2k piece of plywood. I took out all 9 screws attaching the plywood piece that the ak3 is mounted to but that piece of plywood does not seem to be coming apart from the larger side piece. It’s like it’s glued down too. Is that piece not designed to ever come off? so my next option would be to remove the entire left side of the bottom unit. I didn’t count but it has about 2 dozen screws. Before I remove all of them only to find out it too does not detach, can anyone tell me if or if not this is the way to go to gain access to the lower ak3? Quote Link to comment Share on other sites More sharing options...
DVDMike Posted July 22, 2021 Author Share Posted July 22, 2021 I just needed to pry off the plywood panel. It needed a bit of coxing. Quote Link to comment Share on other sites More sharing options...
Marvel Posted July 25, 2021 Share Posted July 25, 2021 👍 gaskets can be stubborn. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.