Jump to content
The Klipsch Audio Community
DVDMike

Klipschorn access to bass bin AK-3 board?

Recommended Posts

Someone put me out of my misery here please. I’m trying to gain access to the bass bin crossover in my ak3 1992 klipschorn. I took off the input panel but that doesn’t provide enough room.
 

i can tell that the crossover is mounted inside to the right of the input connector box. That box is connected to a 2’x2k piece of plywood. I took out all 9 screws attaching the plywood piece that the ak3 is mounted to but that piece of plywood does not seem to be coming apart from the larger side piece. It’s like it’s glued down too. Is that piece not designed to ever come off?

 

so my next option would be to remove the entire left side of the bottom unit. I didn’t count but it has about 2 dozen screws. Before I remove all of them only to find out it too does not detach, can anyone tell me if or if not this is the way to go to gain access to the lower ak3?

 

8DCE5F93-0C1D-4957-A46B-84EED089B8D9.jpeg

Share this post


Link to post
Share on other sites

I just needed to pry off the plywood panel. It needed a bit of coxing. 

Share this post


Link to post
Share on other sites

👍
 gaskets can be stubborn.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...