Marvel Posted August 6, 2021 Share Posted August 6, 2021 14 hours ago, zeagan said: I had some 10awg OFC speaker cable that was obnoxious overkill for this application but why not. Is that KnuKonceptz wire? Great stuff at a reasonable price, and what I use to my speakers. Not 10 gauge, but it's good cable. Beautiful job on the cabinets. Bruce Quote Link to comment Share on other sites More sharing options...
zeagan Posted August 6, 2021 Author Share Posted August 6, 2021 1 hour ago, Marvel said: Is that KnuKonceptz wire? Great stuff at a reasonable price, and what I use to my speakers. Not 10 gauge, but it's good cable. Beautiful job on the cabinets. Bruce Yep it's KnuKonceptz, kind of a dorky name but the only reasonably priced actual copper speaker cable I could find in fairly thick gauge. Originally got it to replace some cables in an old Akai power amp that used 10awg internally. Great stuff, super easy to work with. 2 Quote Link to comment Share on other sites More sharing options...
wetowne Posted August 6, 2021 Share Posted August 6, 2021 16 hours ago, zeagan said: And they're done! They sound great and I'm just giving them a good listen, thanks for coming along for the thread. Better than new! I hate to say it but Klipsch never made a Heresy that nice. 2 1 Quote Link to comment Share on other sites More sharing options...
CoryGillmore Posted August 6, 2021 Share Posted August 6, 2021 1 hour ago, zeagan said: Yep it's KnuKonceptz, kind of a dorky name but the only reasonably priced actual copper speaker cable I could find in fairly thick gauge. Originally got it to replace some cables in an old Akai power amp that used 10awg internally. Great stuff, super easy to work with. Awesome! Just picked up a 100ft roll from Amazon. Of 12 guage, that is. Quote Link to comment Share on other sites More sharing options...
Pondoro Posted August 6, 2021 Share Posted August 6, 2021 Those look great! Did you use spray adhesive on the front of the grill boards or just the back? Quote Link to comment Share on other sites More sharing options...
zeagan Posted August 7, 2021 Author Share Posted August 7, 2021 18 hours ago, Pondoro said: Those look great! Did you use spray adhesive on the front of the grill boards or just the back? Thanks, and yeah did both the front and the outer edge on the back of the boards. Quote Link to comment Share on other sites More sharing options...
Pondoro Posted August 7, 2021 Share Posted August 7, 2021 54 minutes ago, zeagan said: Thanks, and yeah did both the front and the outer edge on the back of the boards. So did you stretch the cloth? or just lay it flat and then place the sprayed board on it? I am about to do this so I am very curious, your result looks great. Quote Link to comment Share on other sites More sharing options...
zeagan Posted August 7, 2021 Author Share Posted August 7, 2021 26 minutes ago, Pondoro said: So did you stretch the cloth? or just lay it flat and then place the sprayed board on it? I am about to do this so I am very curious, your result looks great. Didn't stretch, honestly the cloth doesn't have a lot of stretch to it. basically laid it down and made sure the pattern in the cloth was parallel with the board. I did sort of stretch the edges around though. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.