ssh Posted September 14, 2021 Share Posted September 14, 2021 Is Roxul or acoustic foam more efficient for H/T use? I'd like to cover with framed posters but am thinking that the glass would negate the absorption. SSH Quote Link to comment Share on other sites More sharing options...
jimjimbo Posted September 14, 2021 Share Posted September 14, 2021 37 minutes ago, ssh said: Is Roxul or acoustic foam more efficient for H/T use? I'd like to cover with framed posters but am thinking that the glass would negate the absorption. SSH I have used a lot of Roxul in the past with excellent results. And yes, the glass would negate the absorption. Quote Link to comment Share on other sites More sharing options...
inMotionGraphics Posted September 14, 2021 Share Posted September 14, 2021 I would go with Roxul or any other similar mineral wool absorption over acoustic foam, although I'm not sure what acoustic foam you are referring to, as there are many types. My bigger concern however is what you mean by covering it with framed posters and glass negating the absorption. If you cover the absorption panels with anything that isn't acoustically transparent, such as a poster or glass, then it will definitely defeat the absorption. Glass is highly reflective of sound waves. Unless you are planning on printing your posters on acoustically transparent material, which is definitely an option, but then I would have them done by a company that uses an acoustically transparent print technique to ensure best results. I hope this helps. Brendon Quote Link to comment Share on other sites More sharing options...
Shiva Posted September 14, 2021 Share Posted September 14, 2021 Yes, you would not want glass, you want the sound to pass through the panels with ease. Check out this site for ideas on creating art panels. I would also investigate acoustic cotton for in house panels. https://www.acoustimac.com/acousticart Also check out this link to a guy who makes panels over at AVS for some ideas as well. There is a long thread there for how to make them diy. https://www.avsforum.com/threads/acoustic-panels.2951222/#post-55534842 1 Quote Link to comment Share on other sites More sharing options...
ssh Posted September 14, 2021 Author Share Posted September 14, 2021 I'm getting eight 2'x4'x2"Microsuade panels from ATSAcoustics. I'll start there, anyway. SSH Quote Link to comment Share on other sites More sharing options...
Schu Posted September 14, 2021 Share Posted September 14, 2021 very little discussion about sound clouds in the forum... 1 Quote Link to comment Share on other sites More sharing options...
ssh Posted September 14, 2021 Author Share Posted September 14, 2021 Do you think a few folks might be at work, Schu, lol? SSH Quote Link to comment Share on other sites More sharing options...
inMotionGraphics Posted September 15, 2021 Share Posted September 15, 2021 10 hours ago, Schu said: very little discussion about sound clouds in the forum... Sound Clouds? As in ceiling absorption? Quote Link to comment Share on other sites More sharing options...
The Dude Posted September 20, 2021 Share Posted September 20, 2021 On 9/14/2021 at 2:27 PM, Schu said: very little discussion about sound clouds in the forum... Check on Room Acoustics: Absorption, Diffusion, and Soundproofing on Facebook. Lots of info on there. 1 Quote Link to comment Share on other sites More sharing options...
babadono Posted September 20, 2021 Share Posted September 20, 2021 reflective absorption is like pretty ugly and a little big 1 Quote Link to comment Share on other sites More sharing options...
Edgar Posted September 20, 2021 Share Posted September 20, 2021 14 minutes ago, babadono said: reflective absorption is like pretty ugly and a little big Job satisfaction. (Yes, I'm at work.) 1 Quote Link to comment Share on other sites More sharing options...
ssh Posted November 26, 2021 Author Share Posted November 26, 2021 I've installed about 3/4 of the acoustical room treatments and temporarily placed speakers in the room. The 396s got hooked-up and sound pretty good. It was nice to spend a few hours with some music. I cleaned the JFL 2A3s a bit and will hook them up to the Khorns tomorrow. It's been an 18 month remodel in the house, but I'm starting to get some use out of it, even though it's still a few weeks from completion. SSH Quote Link to comment Share on other sites More sharing options...
Khornukopia Posted July 28, 2022 Share Posted July 28, 2022 Most rooms can benefit from acoustic treatment. Different methods for various frequency ranges. Some thick bass traps have smooth surfaces to reflect high frequencies. 1 Quote Link to comment Share on other sites More sharing options...
babadono Posted July 28, 2022 Share Posted July 28, 2022 5 minutes ago, Khornukopia said: Most rooms can benefit from acoustic treatment. Different methods for various frequency ranges. Some thick bass traps have smooth surfaces to reflect high frequencies. This is my next audio endeavor for sure can't afford the new Jubes. 2 Quote Link to comment Share on other sites More sharing options...
Khornukopia Posted July 28, 2022 Share Posted July 28, 2022 8 minutes ago, babadono said: This is my next audio endeavor for sure ... Highly recommended. 1 Quote Link to comment Share on other sites More sharing options...
flatgrass Posted July 31, 2022 Share Posted July 31, 2022 I started my first absorption panels in 2014. Over time came back and added some grids on some for reflection / diffusion via a simplified hacking of the RPG BAD panels. I have used 12 of the 2" cotton panels from AcouticMac mentioned above. It has really helped my small room which has a variety of walls : plaster and lather, wallboard on cinder block, and wallboard studded to brick. Still at it, replacing the painted masonite panels with stained plywood for a different look. 4 Quote Link to comment Share on other sites More sharing options...
Khornukopia Posted August 2, 2022 Share Posted August 2, 2022 On 7/31/2022 at 5:16 PM, flatgrass said: RPG BAD panels. BAD is good! 1 Quote Link to comment Share on other sites More sharing options...
Islander Posted August 12, 2022 Share Posted August 12, 2022 I'm considering some room treatments now, because I've taken the hardware side of the system about as far as I want to. However, I don't want to just stick various devices in various parts of the room and hope for the best. I'm thinking about getting an expert in to take a look and listen, so it will be done right the first time. Hopefully, I can find someone on the Island, because if they have to come over on the ferry (90 minutes each way, plus an hour or two waiting time before you get on in most cases, with his hours clicking away steadily. Total with driving time to and from the docks = ~7 hours!) from Vancouver, it would get very costly before he even walks in my door. That would be just the estimate. Then there would be the delivery and installation. That means I really need to find a local expert. On 7/31/2022 at 4:16 PM, flatgrass said: I started my first absorption panels in 2014. Over time came back and added some grids on some for reflection / diffusion via a simplified hacking of the RPG BAD panels. I have used 12 of the 2" cotton panels from AcouticMac mentioned above. It has really helped my small room which has a variety of walls : plaster and lather, wallboard on cinder block, and wallboard studded to brick. Still at it, replacing the painted masonite panels with stained plywood for a different look. At the same time, I'm pondering new cabinets and fixtures for the kitchen and one bathroom. Add that up, and there goes the price of a car. Yikes! BTW, I see you have the classic box fan, once a staple in every home. Is that Harvest Gold? I still have mine from 1973. It's Avocado Green. All it's ever needed was some dusting of the fan blades a few years ago. Good stuff lasts. 1 Quote Link to comment Share on other sites More sharing options...
flatgrass Posted August 12, 2022 Share Posted August 12, 2022 That was half of my HVAC system for this untreated basement room. The panel heater is its complement. I somehow came in possession of it (used) in 1982. Has traveled with me to east, gulf, and west coast and many places in between. Many an apartment, rental house, and BOQ over the years. Served me well, still works, but have placed it in reserve. Two smaller ones now replace it. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.