Jump to content

Denon/Klipsch


Jdog

Recommended Posts

Hello looking for some advice!

My living room is 13x16 with 9’ ceilings.

 

looking to buying the following for a 5.2.4 Dolby Atmos, Klipsch. 
RP-6000F for the front, RP-500M for the rear, RP-504C for the center, CDT-5650-CII for the Atmos. 
 

Would the Denon AVR-4700H power the RP-500C and the 4 CDT-5650-CII for the Atmos speakers ? And power the RP-6000F and RP-504C with and external amp? 

 

What AVR receiver and AMP would you use? And how would you wire them both up? 

 

 

Link to comment
Share on other sites

Hello looking for some advice!
My living room is 13x16 with 9’ ceilings.
 
looking to buying the following for a 5.2.4 Dolby Atmos, Klipsch. 
RP-6000F for the front, RP-500M for the rear, RP-504C for the center, CDT-5650-CII for the Atmos. 
 
Would the Denon AVR-4700H power the RP-500C and the 4 CDT-5650-CII for the Atmos speakers ? And power the RP-6000F and RP-504C with and external amp? 
 
What AVR receiver and AMP would you use? And how would you wire them both up? 
 
 
Should be fine...I have 8000fs,504c, 400m and 4 crappy Atmos speakers and my 4400 powers everything just fine

Sent from my KB2007 using Tapatalk


  • Like 1
Link to comment
Share on other sites

On 10/6/2021 at 8:23 PM, Jdog said:

Hello looking for some advice!

My living room is 13x16 with 9’ ceilings.

 

looking to buying the following for a 5.2.4 Dolby Atmos, Klipsch. 
RP-6000F for the front, RP-500M for the rear, RP-504C for the center, CDT-5650-CII for the Atmos. 
 

Would the Denon AVR-4700H power the RP-500C and the 4 CDT-5650-CII for the Atmos speakers ? And power the RP-6000F and RP-504C with and external amp? 

 

What AVR receiver and AMP would you use? And how would you wire them both up? 

 

 

Get The AVR first and use it.

You might not need another amp.

As far as speaker hook up, refer to owners manual.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...