Aragorn Posted October 13, 2021 Share Posted October 13, 2021 (edited) Hi All, I am getting a deal with the following setup: 2 RP-8000F, 1 RP-504C, 2 RP-502S and FREE PL-200II Sub (I don't know BIC company, but it goes down to 21 HZ) For around $2100!! I don't think a better deal would come-by even in thanksgiving, correct me if I am wrong. +RP-502SA for $400/pair as front elevation atmos speakers. Setting them up with Denon AVR-760 which has 75W per channel with .08 distortion and 2 channel driven. Thinking of setting them up in a 20x15 feet (not completely rectangular room) as shown in the enclosed diagram. Mlp is 9.5 feet from front speakers and 3.5 feet from side surrounds. Would this work for a 5.1.2 dolby atmos? Any recommendations on the layout? Edited October 13, 2021 by Aragorn Quote Link to comment Share on other sites More sharing options...
wuzzzer Posted October 13, 2021 Share Posted October 13, 2021 Technically where you have your 500SAs shown they'd be considered front heights. Atmos should be overhead facing down toward you. I chose to go with AW-650 "outdoor" speakers on the ceiling for Atmos. They sound fantastic and were tremendously easy to install and aim with their brackets. Quote Link to comment Share on other sites More sharing options...
hobbyinn Posted October 22, 2021 Share Posted October 22, 2021 (edited) The 8000s and 504C are great. Same as my LCR. Now. if you have a flat ceiling, definitely try putting the 500SAs on top of the 8000s and use bounce. See this.... https://www.dolby.com/about/support/guide/speaker-setup-guides/5.1.2-dolby-atmos-enabled-speaker-setup-guide/ Regarding this sentence. I am guessing you meant RP-500SA as shown in your diagram. "+RP-502SA for $400/pair as front elevation atmos speakers." Edited October 22, 2021 by hobbyinn added comment Quote Link to comment Share on other sites More sharing options...
Aragorn Posted October 23, 2021 Author Share Posted October 23, 2021 13 hours ago, hobbyinn said: Regarding this sentence. I am guessing you meant RP-500SA as shown in your diagram. Yes I meant the rp-500sa. I set them up on top of the towers but the Atmos effect is not great. The ceiling is flat. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.