dtr20 Posted November 19, 2021 Share Posted November 19, 2021 This was a fun project and I learned a ton, but I have no room for these anymore. It is time to sell. These are located in Massachusetts. I am asking $2,000. These LaScalas sound great! These were hanging in a family fun center for the last 20-40 years (I really don't know how long they were there). I have thoroughly cleaned these speakers, including removing the mid-range drivers and cleaning the horns with soap, water with a microfiber cloth. The dog house panels were removed, the woofer screws were tightened, the old gasket tape was removed and new closed cell gasket foam was installed, and then the panels were reinstalled. I have recapped the Type AA crossovers using JEM Performance Audio capacitors to the original specs. The old capacitors are in a labeled bag that matches the serial number of the speaker they came out of, as well as the crossover. The mid-range drivers are the K-55-V soldered lug terminals drivers. 1 Quote Link to comment Share on other sites More sharing options...
dtr20 Posted November 19, 2021 Author Share Posted November 19, 2021 Pictures 3 Quote Link to comment Share on other sites More sharing options...
dtr20 Posted November 20, 2021 Author Share Posted November 20, 2021 The tweeters are both K77 with round magnets. The speakers are sequential serial numbers, not that that really matters on industrials.Sent from my SM-G781V using Tapatalk Quote Link to comment Share on other sites More sharing options...
OO1 Posted November 20, 2021 Share Posted November 20, 2021 On 11/19/2021 at 2:59 PM, dtr20 said: I have recapped the Type AA crossovers using JEM Performance Audio capacitors to the original specs. Sorry to highjack your thread , Can I ask you , how much , did you pay for the JEM caps for the LSI Quote Link to comment Share on other sites More sharing options...
dtr20 Posted November 20, 2021 Author Share Posted November 20, 2021 The price was $124.45 shipped for the Type AA cap kit, as of September, 2021 Quote Link to comment Share on other sites More sharing options...
drewogatory Posted November 21, 2021 Share Posted November 21, 2021 Man, they look great. I wish they put those handles on the consumer line as well. Just make em fancy FFS. Quote Link to comment Share on other sites More sharing options...
Dave A Posted November 21, 2021 Share Posted November 21, 2021 16 minutes ago, drewogatory said: Man, they look great. I wish they put those handles on the consumer line as well. Just make em fancy FFS. You can buy handles. You can even buy Klipsch handles on EBay at times. Once you cut them in though unless they are LSI's you screw the value up. Quote Link to comment Share on other sites More sharing options...
BadChile Posted November 21, 2021 Share Posted November 21, 2021 I just want to know what Family Fun Center....curious if I've heard these in the flesh before....care to disclose? Quote Link to comment Share on other sites More sharing options...
dtr20 Posted November 21, 2021 Author Share Posted November 21, 2021 24 minutes ago, BadChile said: I just want to know what Family Fun Center....curious if I've heard these in the flesh before....care to disclose? Fantasyland in Seekonk, MA. It was an arcade with kiddie rides and stuff. Quote Link to comment Share on other sites More sharing options...
BadChile Posted November 21, 2021 Share Posted November 21, 2021 1 hour ago, dtr20 said: Fantasyland in Seekonk, MA. It was an arcade with kiddie rides and stuff. Cool, and fortunately not. I was worried it would be Bonkers Fun House in Danvers (ugh....that place!) Quote Link to comment Share on other sites More sharing options...
dtr20 Posted November 24, 2021 Author Share Posted November 24, 2021 Anyone? I wanted to list these here before going to Craigslist, etc Quote Link to comment Share on other sites More sharing options...
dtr20 Posted December 1, 2021 Author Share Posted December 1, 2021 Last bump before I go more public places Quote Link to comment Share on other sites More sharing options...
MEH Synergy Posted December 2, 2021 Share Posted December 2, 2021 11 hours ago, dtr20 said: Last bump before I go more public places You sure you don't want to get rid of pictures and price and lash out against the forum? Might be more beneficial? 1 Quote Link to comment Share on other sites More sharing options...
MEH Synergy Posted December 2, 2021 Share Posted December 2, 2021 Anyone that is looking, cash and carry is a no brainer here. Rare. Won't see em again here for this price in this shape. Get em if you want em. Don't regret it later. Poor condition, regular la scalas in CA go for this asking price... be forewarned.... 1 Quote Link to comment Share on other sites More sharing options...
dtr20 Posted December 3, 2021 Author Share Posted December 3, 2021 On 12/1/2021 at 11:40 PM, Westcoastdrums said: Anyone that is looking, cash and carry is a no brainer here. Rare. Won't see em again here for this price in this shape. Get em if you want em. Don't regret it later. Poor condition, regular la scalas in CA go for this asking price... be forewarned.... Thank you for the plug, I appreciate it Quote Link to comment Share on other sites More sharing options...
Tom Bird Posted December 3, 2021 Share Posted December 3, 2021 If I had the space I would grab those as well.Sent from my LM-G710VM using Tapatalk Quote Link to comment Share on other sites More sharing options...
dtr20 Posted December 3, 2021 Author Share Posted December 3, 2021 46 minutes ago, Tom Bird said: If I had the space I would grab those as well. Sent from my LM-G710VM using Tapatalk Come on, you can do 7.1 La Scalas. Or do a separate 2 channel setup. Just stack the Scalas on top of each other! 😁 Quote Link to comment Share on other sites More sharing options...
Tom Bird Posted December 3, 2021 Share Posted December 3, 2021 Come on, you can do 7.1 La Scalas. Or do a separate 2 channel setup. Just stack the Scalas on top of each other! [emoji16]Lol, I would love the 7.Lascala, 2.18" Ultimax 4 KPT8000m. The Chorus 1 fit better at the moment for my sides in this 10x20 Sardine Can of a room.Sent from my LM-G710VM using Tapatalk Quote Link to comment Share on other sites More sharing options...
CWOReilly Posted December 3, 2021 Share Posted December 3, 2021 If somehow they magically could appear in Atlanta..... Quote Link to comment Share on other sites More sharing options...
dtr20 Posted December 3, 2021 Author Share Posted December 3, 2021 If somehow they magically could appear in Atlanta.....There is such thing as freight shipping. Not sure if that's magical enough for youSent from my SM-G781V using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.