Jump to content

L pads


CECAA850

Recommended Posts

23 minutes ago, Crankysoldermeister said:

Two-way?

 

https://www.fullcompass.com/common/files/17291-DH1ASpecSheets.pdf

 

Compare the impedance plots. Notice how similar they look with the exception of where on the plot they are. 
 

Could be a nominal 8 ohm tweeter depending on where the crossover point is. 

Top horn assembly labeled 6 ohm, driver measures 4.

Link to comment
Share on other sites

12 minutes ago, CECAA850 said:

500 hz  12db slope.


Extrapolating data from the DH1A SPEC sheet, it looks like the impedance at 500Hz is @ 12 Ohms. However, the impedance may be different if you are using a horn that is not an HP9040. 
 

Assuming the impedance of your driver and horn is 12 Ohms the L-Pad chart I posted will not be valid. I’ll have to post another one for 12 Ohms. 

Link to comment
Share on other sites

4 minutes ago, Curious_George said:


Extrapolating data from the DH1A SPEC sheet, it looks like the impedance at 500Hz is @ 12 Ohms. However, the impedance may be different if you are using a horn that is not an HP9040. 
 

Assuming the impedance of your driver and horn is 12 Ohms the L-Pad chart I posted will not be valid. I’ll have to post another one for 12 Ohms. 

I'm using the stock 9040.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...