Jump to content

KP-480-SW Info Needed


mingham

Recommended Posts

18 minutes ago, mingham said:

I can't find any specs on these online.  Would they be good paired with a horn?  If so, which one?

 

  

 

Here's the specs from Klipsch's website:


SPECIFICATIONS
BUILT FROM: 2001
BUILT UNTIL: 2004
COVERAGE ANGLE: Essentially omnidirectional below 150Hz
CROSSOVER FREQUENCY: 150Hz
DIMENSIONS: 26.9" (68.3cm) x 23.825" (60.6cm) x 24" (61.1cm)
ENCLOSURE MATERIAL: 1" baffle board; all sides 0.75" (19mm) plywood, internally braced, lined with acoustical foam.
FREQUENCY RESPONSE: 44Hz - 200Hz(+-)4dB (-10dB @ 34Hz) @ 3 meters, 1/2 space anechoicUsable response to 2.5kHz
INPUT CONNECTIONS: Parallel-locking Neutrik® D-shell 0.25" phone jacks and red/black five-way binding posts. Input is fused (4-A recommended).
MAX CONTINUOUS OUTPUT: 127dB
NOMINAL IMPEDANCE: 8 ohms, 5 ohms minimum @ 43Hz
POWER HANDLING: 400 watts (44.7V)
SENSITIVITY: 103dB @ 2.83V, 1 meter, 1/2 space anechoic
WEIGHT: 85 lbs. (38.6kg) Net/99 lbs. (45kg) Shipping
WOOFER: One 18" K-49-K die-cast aluminum frame woofer and one 15" KD-17 passive radiator
 

  • Like 1
Link to comment
Share on other sites

I used a pair with Heresy HIPs and a Peavey FH-1/Altec 511B-902-8B hybrid.  they sound good and rescued the Peaveys from playing below 100 Hz where they distorted a lot.  Used them at church coffeehouses. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...