HelpfulWife Posted April 14, 2022 Share Posted April 14, 2022 Does anyone know which settings Mr Delgado recommends for the EQ Settings on the K402/K-691 combo? Just trying to assist my dearest husband who keeps adjusting but wants to hear the settings he believes to be the greatest settings around. Quote Link to comment Share on other sites More sharing options...
Moderators Travis In Austin Posted April 16, 2022 Moderators Share Posted April 16, 2022 On 4/14/2022 at 4:05 PM, HelpfulWife said: Does anyone know which settings Mr Delgado recommends for the EQ Settings on the K402/K-691 combo? Just trying to assist my dearest husband who keeps adjusting but wants to hear the settings he believes to be the greatest settings around. Can't wait to hear the back story on all of this. They are here somewhere, and someone will help you find them. EDIT: what is the K402/K-691 sitting on top of? A KPT-KHJ bass bin, or something how brew? If it's on a home brew bass bin then your husband's settings are going to be best (it's one of the laws of audio that your own speakers sound better, and a corollary is that your settings are also best) Quote Link to comment Share on other sites More sharing options...
OO1 Posted April 16, 2022 Share Posted April 16, 2022 On 4/14/2022 at 5:05 PM, HelpfulWife said: Does anyone know which settings Mr Delgado recommends for the EQ Settings on the K402/K-691 combo? Just trying to assist my dearest husband who keeps adjusting but wants to hear the settings he believes to be the greatest settings around. @Islander @Schu @Paducah Home Theater Quote Link to comment Share on other sites More sharing options...
jjptkd Posted April 16, 2022 Share Posted April 16, 2022 On 4/14/2022 at 2:05 PM, HelpfulWife said: Just trying to assist my dearest husband https://d2um2qdswy1tb0.cloudfront.net/files/Klipsch_Cinema_Active_Settings_March_2014.pdf 2 Quote Link to comment Share on other sites More sharing options...
Schu Posted April 16, 2022 Share Posted April 16, 2022 7 hours ago, jjptkd said: https://d2um2qdswy1tb0.cloudfront.net/files/Klipsch_Cinema_Active_Settings_March_2014.pdf That is interesting... I don't think I have ever seen that. OP... Austin is correct, it would make a big difference as to what bass bin your husband is using... and if it's not something tried by someone here, our recommendations would be problematic. Quote Link to comment Share on other sites More sharing options...
PrestonTom Posted April 16, 2022 Share Posted April 16, 2022 15 minutes ago, Schu said: That is interesting... I don't think I have ever seen that. OP... Austin is correct, it would make a big difference as to what bass bin your husband is using... and if it's not something tried by someone here, our recommendations would be problematic. It is potentially even more complicated. The document did not show any bass bin PEQs for the (underground) Jubilee. Originally, Roy did provide these for use with Electrovoice DX38 processor. Additionally not only is identifying which bass bin is being used, we need to know which processor is being used. For instance, loading the parameters for the EV DX38 into a miniDSP processor will require modification. Quote Link to comment Share on other sites More sharing options...
Islander Posted April 16, 2022 Share Posted April 16, 2022 If your family speakers (the ones that happily present to you and your husband the most realistic possible presentations of your favourite music, and video soundtracks) are Klipsch Jubilees, Roy’s the best person to contact. He was second only to Paul Klipsch himself in the creation of the Jubilees, and knows more about them than anyone. Quote Link to comment Share on other sites More sharing options...
LTusler Posted April 16, 2022 Share Posted April 16, 2022 On 4/14/2022 at 4:05 PM, HelpfulWife said: Does anyone know which settings Mr Delgado recommends for the EQ Settings on the K402/K-691 combo? Just trying to assist my dearest husband who keeps adjusting but wants to hear the settings he believes to be the greatest settings around. I would be happy to email you the base Xilica settings if that's the DSP you are using. Send me a PM with your email. Quote Link to comment Share on other sites More sharing options...
Travisallen Posted April 19, 2022 Share Posted April 19, 2022 On 4/15/2022 at 10:48 PM, Travis In Austin said: Can't wait to hear the back story on all of this. They are here somewhere, and someone will help you find them. EDIT: what is the K402/K-691 sitting on top of? A KPT-KHJ bass bin, or something how brew? If it's on a home brew bass bin then your husband's settings are going to be best (it's one of the laws of audio that your own speakers sound better, and a corollary is that your settings are also best) Back story isn't very good. I purchased the K402s a couple years ago with our favorite Klipsch dealer. At the time, I didn't have enough spare cash to pick up the Xilica with an amp, so I got the KDA-1000, which worked with my Pioneer audio receiver's pre outs. Now even worse than the "Underground Jubilees," I put the K402 on top of Belle bass bins. The audio receiver didn't play well with the KDA-1000, so my best speakers were out of commission and I decided that I needed to upgrade. So I bought the Xilica, I added pre amps, but I forgot to ask our favorite dealer to program it. I did ask after the fact, but he is a very busy man, so I understand the lack of a response. I asked my wife to try and find the settings while at work, because every once in a while, if I can't find something, she can. Roy was nice enough to respond, he said he would look to see if he still has the Jubescala settings and would send them if he could find them. I appreciate everyone's responses, one of the reasons I love Klipsch is the community, everyone is so helpful. 1 Quote Link to comment Share on other sites More sharing options...
Klipsch Employees Chief bonehead Posted April 19, 2022 Klipsch Employees Share Posted April 19, 2022 Attached are the 402 with ls and 402 with jub lf LS AND K-402-hf with k-691.docx KPT-KHJ-KF AND K-402-hf with k-691.docx 1 Quote Link to comment Share on other sites More sharing options...
babadono Posted April 19, 2022 Share Posted April 19, 2022 Hi Roy.....do you also have a nice Word file for us guys who went as far as searching out TAD4002s? Are there differences? @Chief bonehead Quote Link to comment Share on other sites More sharing options...
MMurg Posted April 19, 2022 Share Posted April 19, 2022 Do similar settings exist for the La Scala bass bin with the K-510/K-691? Quote Link to comment Share on other sites More sharing options...
Coytee Posted April 19, 2022 Share Posted April 19, 2022 18 hours ago, Travisallen said: Roy was nice enough to respond, he said he would look to see if he still has the Jubescala settings and would send them if he could find them. I'm not Roy...and I don't think this is your driver, but it might get you in the ballpark? DX-38 settings for LaScala (1 or 2) LF with K402 & K69.pdf Quote Link to comment Share on other sites More sharing options...
Coytee Posted April 19, 2022 Share Posted April 19, 2022 2 hours ago, babadono said: Hi Roy.....do you also have a nice Word file for us guys who went as far as searching out TAD4002s? Are there differences? @Chief bonehead Not a Word file....and maybe not exactly what you're looking for but might be close Klipsch Jubilee-TAD 4002 - EV Dx38 Settings 2 Oct 2014 (1).pdf Quote Link to comment Share on other sites More sharing options...
Coytee Posted April 19, 2022 Share Posted April 19, 2022 Since many have the Xilica processor.....I think Roy should obtain one and recurve everything so we can have updated parameters for the Xilica. We could perhaps bribe him with copious amounts of bbq ribs & blueberries. Quote Link to comment Share on other sites More sharing options...
Schu Posted April 19, 2022 Share Posted April 19, 2022 Why not create a pinned thread with every setting parameter that people are using based on driver and LF? They may or may not be plug and play, but it may give folks a starting point. 1 Quote Link to comment Share on other sites More sharing options...
Schu Posted April 19, 2022 Share Posted April 19, 2022 Someone should ask CB if he's ever heard the Jubilee using an AK crossover... 1 Quote Link to comment Share on other sites More sharing options...
Coytee Posted April 19, 2022 Share Posted April 19, 2022 I've got a little voice in the back of my head that says I posted many (all?) of the files I have. If I did so, to be fair, it might have been 10/15 years ago. I still have them BUT, they are all configurations for the K-69 driver that the old buyers received AND they are configured using the EV DX-38. I don't recall the technical differences but the DX uses "volts" (or something) to make the incremental changes whereas the Xilica uses DB's or some other format.... so you have to jump through some hoops to figure out what one unit in the DX is worth as a unit in the Xilica. Now, if that jumble above made sense....you can take the rest of the day off! Quote Link to comment Share on other sites More sharing options...
Marvel Posted April 20, 2022 Share Posted April 20, 2022 3 hours ago, Coytee said: Now, if that jumble above made sense....you can take the rest I'm already home from work... can I go in late tomorrow? Quote Link to comment Share on other sites More sharing options...
mikebse2a3 Posted April 20, 2022 Share Posted April 20, 2022 8 hours ago, Chief bonehead said: Attached are the 402 with ls and 402 with jub lf LS AND K-402-hf with k-691.docx 13.56 kB · 13 downloads KPT-KHJ-KF AND K-402-hf with k-691.docx 13.49 kB · 10 downloads @Chief bonehead for clarity are these the settings using the Xilica or EV DX38 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.