Jump to content

Looking for Klipsch Heresy Industrial H1 K-42E


jw80

Recommended Posts

They should be the same specs. Some might suggest buying the pair and selling the single good one you have. Or... using the two you buy and keeping the one you ready have as a spare.

  • Like 1
Link to comment
Share on other sites

I bought a pair years ago..thought one of the woofers was shot also. Turned out that ginormous magnet had shifted and had the woofer frozen up. You can carefully cut the dust cover off and look to see if that has happened to yours also. If it is you can use a dead blow hammer and shims to get it back where it should be then super glue the magnet back to the basket. It’s a little tedious to get it properly aligned. 

Link to comment
Share on other sites

28 minutes ago, Madman1 said:

I bought a pair years ago..thought one of the woofers was shot also. Turned out that ginormous magnet had shifted and had the woofer frozen up. You can carefully cut the dust cover off and look to see if that has happened to yours also. If it is you can use a dead blow hammer and shims to get it back where it should be then super glue the magnet back to the basket. It’s a little tedious to get it properly aligned. 

 

I pulled the dust cap off and don't see anything that looks off.  Everything moves freely.  What exactly should I look for?

20240907_204437.jpg

Link to comment
Share on other sites

10 hours ago, jw80 said:

 

I pulled the dust cap off and don't see anything that looks off.  Everything moves freely.  What exactly should I look for?

20240907_204437.jpg

Ok if it’s moving freely then it wouldn’t be the magnet shifting that’s causing the problem. Sorry about that. 

Link to comment
Share on other sites

  • 3 weeks later...
  • Moderators
On 9/7/2024 at 4:48 AM, jw80 said:

I recently picked up a pair of Hersey Industrial H1s.  One of the woofers (K-42E) is dead.  Anyone out there have one they are looking to part with?

How did you come out on this? Did you fine one? Determine if it was in fact bad?

 

Travis

Link to comment
Share on other sites

On 9/29/2024 at 1:19 PM, Travis In Austin said:

How did you come out on this? Did you fine one? Determine if it was in fact bad?

 

 

Actually, I found that the wires between the connections and the voicecoil are missing.  The seller said he'd had it tested and it was bad, but this is a pretty glaring issue.  I have no idea why these would be gone, but I soldered in new wires for testing and it works.  I am still working on refinishing the cabinets, so I don't have everything together for testing, but this was the issue.

20241002_045500.jpg

  • Like 1
  • Confused 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...