Adding floor spikes to KSW-10?

[NormanB]

Is it possible to add spikes to this sub? If so, what diameter spikes do I need? I have seen 3/8" and 1/2" spikes.

Thanks

[ironwoods]

Hi, I use these Dayton Audio spikes on my 12" Velodyne sub, purchased from Parts Express. You will have to gain access to the interior for adapting the T-nuts. They sell them in different finishes.

http://www.partsexpress.com/pe/showdetl.cfm?&DID=7&Partnumber=240-717

[sivadselim]

i ended up not setting my system up where there was carpet, so i never added the spikes, but i was planning on just using the existing screw-holes on the bottom of my sub, instead of worrying about t-nuts. iirc, the threads of the screws holding the feet on my rsw15 are "1/4-20", but they may be different on the ksws, if those even have screws on the bottom. i emailed klipsch for this info, btw, and they answered quickly. so fire off an email and ask 'em.

here's a link to some spikes with different thread sizes, btw

http://www.oregondv.com/15spike.htm

[NormanB]

Well, its a no go. There isn't a place to screw the floor spikes into the feet on this sub. Guess it's time to look for a new sub.

[sivadselim]

"Guess it's time to look for a new sub."

uh, no, it's time to get out the drill. the parts express spike kit that someone linked above has everything you need and complete instructions.