Deang Posted April 7, 2005 Share Posted April 7, 2005 ! Quote Link to comment Share on other sites More sharing options...
Deang Posted April 7, 2005 Share Posted April 7, 2005 Cleaned up a little. Screws were replaced with large T-nuts and bolts a while back. Quote Link to comment Share on other sites More sharing options...
Deang Posted April 7, 2005 Share Posted April 7, 2005 Well, I managed to upload the wrong file twice. Guess it's time for bed. Quote Link to comment Share on other sites More sharing options...
rockbobmel Posted April 7, 2005 Share Posted April 7, 2005 Thanks Dean, I get it. The only place the horns are attached is the oak pieces you attachet to the tophats. It makes sense. The horns are real heavy and wont move anyway. Bob Quote Link to comment Share on other sites More sharing options...
rockbobmel Posted April 18, 2005 Share Posted April 18, 2005 Compromise......... Quote Link to comment Share on other sites More sharing options...
JJkizak Posted April 18, 2005 Share Posted April 18, 2005 What I wonder is how you got the horns to work at all in such a small space? They have to be really choked off in bass output. They really need 25 ft between them to set them free. JJK Quote Link to comment Share on other sites More sharing options...
rockbobmel Posted April 18, 2005 Share Posted April 18, 2005 There is 12 feet between them C to C. If these speakers are supposed to be so f****n great, why are they such a PITA every time I turn around. Everyone sais something different about them. They are really BIG and difficult to work with. I am getting real tired of this. (I'm venting) Can someone come to my house (that knows what they are doing) and listen to these for my. I'm in Greenfield, MA....They sound real nice, but I don't think they are the cats ***. Quote Link to comment Share on other sites More sharing options...
rockbobmel Posted April 18, 2005 Share Posted April 18, 2005 Oh, and another thing....... Can someone please explain in plain english, How can speakers work that well if they are in corners, wait, with the rear flares (walls) facing directly at each other. What happens to the bass that collides with itself, and/or gets mashed around with all the wires, curtains, and back of the component stack- mess??. Shouldn't that bass get directed (I know- omnidirectional), toward the front?? Sorry for the rant, but I hope someone out there understands where I'm coming from. Thanks Quote Link to comment Share on other sites More sharing options...
tigerwoodKhorns Posted April 18, 2005 Share Posted April 18, 2005 ---------------- On 4/18/2005 10:38:00 AM rockbobmel wrote: Compromise......... ---------------- I just built almost the exact same thing as your compromise. How do they sound? And yes, Khorns are a huge pain to woth with. Chris Quote Link to comment Share on other sites More sharing options...
LarryC Posted April 18, 2005 Share Posted April 18, 2005 Mine are along the short wall, only 11 feet corner to corner. I don't have false corners or rotate them away from their 45-degree setting, and most likely (and fortunately) don't know how they would sound if I did. They do sound fine to me. I've always regarded the large, long-length bass waves as being too big to be troubled by wires, bolts, and things, and have assumed that wave fronts join rather than clash, as they head to the front of the speaker along the walls. Tracking down what makes K-horns sound sub-optimal can be a real PITA. The usual suspects are sound sources and electronics, as you know. They sure can be finicky. Good luck! EDIT: Woops, forgot another big suspect, the room (and the crossovers if yours weren't so new). Lots of threads on the forum on room acoustics. My relatively untutored view: I prefer sound absorbing furniture and, personally, carpet, and I don't like bare or nearly bare rooms. Larry Quote Link to comment Share on other sites More sharing options...
Dylanl Posted April 18, 2005 Share Posted April 18, 2005 Larry, how large is your room overall? I found a huge difference in sonic quality moving the Khorns from one room to another. As far as the bass waves go ( I think a 30hz sound wave is something like 30 ft. if it was able to be measured ) you probably are getting a lot of cancelation if your room is small. I hate to say this but the Khorn is a very demanding speaker and you will never get 100% out of them unless evreything is right. Now that I said that you can get darn close with good electronics and accoustical treatments. Does that help you at all? If not I have some info that I could send you that may help. Quote Link to comment Share on other sites More sharing options...
LarryC Posted April 18, 2005 Share Posted April 18, 2005 ---------------- On 4/18/2005 5:13:59 PM Dylanl wrote: Larry, how large is your room overall? I found a huge difference in sonic quality moving the Khorns from one room to another. ---------------- Mine is 12' by 18', but the only two usable corners are across the one short end, and I don't have any other rooms to move them into in this little 1930's Cape Cod. I agree moving them can make a big difference, but I've concentrated on tailoring electronics and sound sources because I'm limited in room options. Anyway, I was saying that I felt I had good sound in spite of the narrow-end room problem. Larry Quote Link to comment Share on other sites More sharing options...
rockbobmel Posted April 18, 2005 Share Posted April 18, 2005 I had NO trouble getting my ForteIIs to sound great. My KHorns sound great also, just different. The bass is more reflected sounding, which they are. I'm not so used to it yet. Everyone's take on things is so subjective. Quote Link to comment Share on other sites More sharing options...
Dylanl Posted April 18, 2005 Share Posted April 18, 2005 I hate that to. It truley is all relative Quote Link to comment Share on other sites More sharing options...
Deang Posted March 22, 2014 Share Posted March 22, 2014 I found my false corner thread. Enjoy. 2 Quote Link to comment Share on other sites More sharing options...
garyrc Posted March 22, 2014 Share Posted March 22, 2014 (edited) Let's put it this way.............my walls are very heavily braced, 2x4 studs, standard 16" o.c. spacing with staggerd horizontal 2x4 stops with some staggered vertical studs inbetween, with four 2x12 plates lag bolted into the foundation wall on each side, the studs wedged tightly against the foundation wall, 1/2" solid core marine grade plywood 8' out from the corners, 5/8" Gypsum sheetrock over that, with the Khorn's tailboard secured to a cut down cut-to corner-fit mitered 2"x12" air-tight corner plate with (8) 1/4" lag screws and the corner plate secured to the wall with (10) 1/4" lag screws. The wall still vibrates. (and so do the dishes in my neighbor's kitchen 40 or 50' away, maybe more) My wall is shorter than Artto's, and it does not vibrate audibly. If you put your hand against it, you can feel the vibration, though. The old wall it replaced danced all over the place. The old one was made of 16" O.C. 2 x 4s with plywood and siding on the outside and sheet rock on the inside. It could not deal with the Klipschorn's assualt. The new wall has closer than 16" O.C, 2 X 6s, 3/4 plywood and exterior siding toward the outside world, and 3/4 plywood screwed and glued covered by 5/8 sheetrock also screwed and glued (with staggered seams) toward the listening area.. As I said, it vibrates, but not audibly. Windows on the other end of the house rattle. A former neighbor said it used to shake her house, but I doubt that. The floor and couch in the listening room move dramatically, even without the sub (the drums on Fanfare for the Common Man will temporarily throw a sturdy table out of square). There is something about the impact that doesn't seem to be explained by the SPL figures. Listening to Khorns at full orchestra levels (or movie Reference level) is an earthmoving experience. Edited March 22, 2014 by Garyrc 1 Quote Link to comment Share on other sites More sharing options...
o0O Bill O0o Posted March 23, 2014 Share Posted March 23, 2014 Has anyone read the manual and built the corners prescribed by Klipsch? Quote Link to comment Share on other sites More sharing options...
Deang Posted March 23, 2014 Share Posted March 23, 2014 (edited) PWK's last home didn't have a proper corner for the right channel because of a window - so I'm pretty sure he did it. I've seen some threads in the last month or two with Klipschorns in less than ideal placement situations, where the typical false corner solution wouldn't work. My method provides a work around. The best solution is enclosing the back like the 60th Anniversary Edition. However, I'm not a woodworker, so I came up with this. These solutions allow for some flexibility not afforded by the traditional method, namely, being able to turn the Klipschorns into the listening area, as well as getting them off the walls. This funnels all of the low frequency energy into the room as opposed to losing what seems to be a considerable amount into the walls - especially if one or both are placed using inside walls. The bass becomes more LaScala/Jubilee-like in its behavior. There is no degradation in low frequency response as long as the Klipschorns remain within 12" of their respective corners. Edited March 23, 2014 by DeanG Quote Link to comment Share on other sites More sharing options...
o0O Bill O0o Posted March 23, 2014 Share Posted March 23, 2014 Dean, I understand your method and that you like the outcome. I'm also not pointing to a right answer, just standard described by Klipsch. Earlier on in this thread, there was a comment about concrete. If one were to interpret the 48" length in the above manual prescription one could have a decent cinder block false corner, and cheap too. Quote Link to comment Share on other sites More sharing options...
Deang Posted March 24, 2014 Share Posted March 24, 2014 (edited) True, but the horns would be locked into the corners and you wouldn't be able to optimize the listening angles for the room they're in. Edited March 24, 2014 by DeanG Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.