Dual 15 inch Corner Bass Bin - Cornscala dbb

[jwc 913]

Yes I do need help. This has gotten addicting.

It has gotten a little boring because it is time to make them look pretty. It is alot more fun to put the cabinets together, install the drivers, make the crossover, then listen.

The pretty stuff takes a lot of SLOW work.

[jwc 913]

Just to show you how well the wood filler and glue can touch up odd angles and small gaps. I have sanded to 220 grit at the corners/angles. Now everything looks "sharp"

This has, however, been the most unappealing part of the process so far.

[BS Button 1]

Looks good JC! Going with the black finish again? If you do, my wife just painted some furniture in black and then put a clear wood finish over it, looks nice and is turning out to be rather durable, as well.

[jwc 913]

Yep,

Goin with an oil based black paint again. This time with a sprayer

[colterphoto1 700]

the gray primer looks good. Almost Altec-VOC-like. Sprayer is giving you a much better finish. Lookin good!

Michael

[IB Slammin 138]

James, You bum. I can't believe that you didn't take them to the beach house to work on.

Prioritize Bubba!

TC

[michael hurd 1]

Jwc: looking good so far!

[jwc 913]

Kudos to Michael Hurd for spending time with me over the phone providing tips for painting with an HVLP.

This is the network. It is almost finalized. I will eventually rid of the alligator clips once I know what taps work with the 511b. Note the blue female connector. This is from the second low pass inductor to hook to my second woofer. Yes, I could have spent some money and got a longer terminal strip. The yellow caps are thetas.

jc

[jwc 913]

Soon to be a challenge for the dbb. 511b vs K401. Driver is Spring terminal K55v.

[jwc 913]

Getting these into the garage for painting wasn't easy. They just barely fit through a standard size door. My wife helped me carry them. She won't help me get them back in the house. Guess I'll need to get a 6-pack a persuade a comrad for some help.

The sprayer definately looks better than a roller (no surprise). Goes on even. The top of the cabinet to the left shows some streaking as it is still wet.

[BS Button 1]

My toungue just slapped my brains out!

[jwc 913]

Must have just eatin sum Little Dewey's BBQ.

[BS Button 1]

Nope, Greek Island Gyro

[michael hurd 1]

Jwc: you can manoever those cabs into the house by yourself, no problem. Just get yourself a fairly sturdy hand truck, and put foam pipe insulation on the uprights.

Use a thick padded blanket around the speaker and secure it to the cart with a strap.

[crazytubepower 4]

I just had an idea. I had contacted you about doing a cornscala project. Well I was thinking about doing a "minihorn" a mini klipsch corner horn. With 1 k-33, frontloaded like a cornwall, but the lf cad with fit in a corner like yours. Using the k-401, k-77 in the hf. Any one have any ideas on that. Anyone with a cad program make a quick render. Anyway just an idea, I may do it who knows.

[michael hurd 1]

Using the k-401 and k-55 would require that the cabinet be 24" deep from front of the cabinet face towards the rear of the corner. Might I suggest using a heresy design instead? The shorter midrange horn would allow a shallower cabinet.

[crazytubepower 4]

what about a k-500? the belle mid range?

[jwc 913]

----------------

On 8/20/2005 11:51:56 PM crazytubepower wrote:

I just had an idea. I had contacted you about doing a cornscala project. Well I was thinking about doing a "minihorn" a mini klipsch corner horn. With 1 k-33, frontloaded like a cornwall, but the lf cad with fit in a corner like yours. Using the k-401, k-77 in the hf. Any one have any ideas on that. Anyone with a cad program make a quick render. Anyway just an idea, I may do it who knows.

----------------

You mean a corner speaker....not horn loaded...right?

If you want to do a Corner Cornscala...here is what I would do knowing what I know now. Make the dbb cabinet just like I did. Place a woofer in the bottom of the cabinet and put your K401 and tweeter in the top portion. Yes, there would be enough depth for the K401. I would not consider a smaller horn if you are going to build big cabinet. Then later...you could switch to two woofers an build a seperate top section.

M. Hurd, I have a hand truck. Last time I did just what you just mentioned, I got small knicks in my cabinets.

[jwc 913]

[jwc 913]

Both pairs of tops and bottoms are painted black. The woofers are in. Now I will see if I like the 511 vs 401. Can't 100% finish the top sections until I know which horn I will use.