George Roland Posted June 23, 2007 Share Posted June 23, 2007 Yo! My K-horns have bass bin tops made by a previous owner. These are two thicknesses of 5/8 inch particle board painted black and crumbling around the edges. I want to make new tops. I have some 3/4 inch baltic birch plywood to build them from, but I need the exact dimensions of the pentagonal top. It would also be very helpful to know the exact distances the top extends out beyond the front and sides of the bass bin. If you have an intact top you would measure for me, and provide the dimensions, that would be much appreciated. Thanks, George Quote Link to comment Share on other sites More sharing options...
Groomlakearea51 Posted June 23, 2007 Share Posted June 23, 2007 Type B or type C? I can provide exact dimensions for both, including the braces, driver board, etc. PM me with an email address, and I can send you photographs of the "raw" parts required. Quote Link to comment Share on other sites More sharing options...
ajsons Posted June 23, 2007 Share Posted June 23, 2007 Groomlakearea51, You have a pm. George, You have a pm. ajsons Quote Link to comment Share on other sites More sharing options...
Groomlakearea51 Posted June 24, 2007 Share Posted June 24, 2007 You guys have PM's and emails. Quote Link to comment Share on other sites More sharing options...
Dylanl Posted June 28, 2007 Share Posted June 28, 2007 George please make a post and compare the Altec 19 to the Klipschorn Brett Quote Link to comment Share on other sites More sharing options...
Dylanl Posted June 28, 2007 Share Posted June 28, 2007 Did you get the plans I sent you?? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.