demorgan510 Posted July 16, 2007 Share Posted July 16, 2007 Hi friends! I am from argentine and i have a bigo problem! R2 and R15 are totally black, in my country the voltage is 220v and theyconnected it without transformer! I cannot see the value of the sameones if somebody has the plane and it can say the values to me... TX! PS: sorry my english isnt very good... Quote Link to comment Share on other sites More sharing options...
colterphoto1 Posted July 16, 2007 Share Posted July 16, 2007 Which speaker model is this from? We should be able to email a schematic to you directly or send you the parts values that you need for replacement. Your English is just fine. Michael Quote Link to comment Share on other sites More sharing options...
demorgan510 Posted July 17, 2007 Author Share Posted July 17, 2007 The model of the speaker is unknown.... it only says bash in the front of subwoofer... Quote Link to comment Share on other sites More sharing options...
liuke98 Posted July 24, 2007 Share Posted July 24, 2007 I had a same problem. I brought the speakers to China and someone plug-in it to 220V without a transformer. Same board (INDIGO HC BASH 640014 rev6) was burn. I think maybe my R2 and R15 are ok but I can't locate R2 and R15. Can you take a photo and post it here? You can email it to me too. My email is liuke98@yahoo.com. I'm still checking which parts on the board were burn. Is there a curcuit graph of this board? By the way, the model of the speakers is Promedia 4.1. Ke Quote Link to comment Share on other sites More sharing options...
jerrysmith1618 Posted September 25, 2014 Share Posted September 25, 2014 (edited) I had a same problem. I brought the speakers to China and someone plug-in it to 220V without a transformer. Same board (INDIGO HC BASH 640014 rev6) was burn. I think maybe my R2 and R15 are ok but I can't locate R2 and R15. Can you take a photo and post it here? You can email it to me too. My email is liuke98@yahoo.com. I'm still checking which parts on the board were burn. Is there a curcuit graph of this board? By the way, the model of the speakers is Promedia 4.1. Ke Hello I also have this board of the same revision (INDIGO HC BASH 640014 rev6). Klipsch part number on the sub woofer is 09050281210 spares 143914-001 One of the resisters R26 is blown. Can you tell me the value of this resister and or send a schematic. of this or better yet send me a resister or board :-) .? Thanks a bunch Jerrysmith1618@gmail.com Edited September 25, 2014 by jerrysmith1618 Quote Link to comment Share on other sites More sharing options...
jonny4d Posted October 28, 2014 Share Posted October 28, 2014 I am having an issue with the same board although its not due to 220. Mine failed with normal 120. Here are the pics of some components that got hot. Do just the resistors need replaced or am I missing an uderlying cause? In Pic1 it looks like R26 got pretty hot. In pic 2 R12 got pretty hot on the 610036 Rev 5 card. Can these boards be replaced? Should I attemp to just replace the resistors? If so what is the value of R26? Are these resistor failures a cause or symptom? Quote Link to comment Share on other sites More sharing options...
TristanWhite Posted October 5, 2019 Share Posted October 5, 2019 Hello, I have BASH 640018 R2 from ASW2500 and blew the thermistor. I assume something else is wrong to cause this? Can anyone send me the circuit diagram for that version of BASH? Quote Link to comment Share on other sites More sharing options...
KwH012ill Posted March 28, 2021 Share Posted March 28, 2021 (edited) On 7/16/2007 at 10:02 AM, colterphoto1 said: Which speaker model is this from? We should be able to email a schematic to you directly or send you the parts values that you need for replacement. Your English is just fine. Michael I’ve had a similar burnout of R12 of my Promedia 4.1 — the made in China sticker says A02150050514, if that means anything. The board says “indigo HC BASH 610036 Rev 5 CWEP200803” What resistor is needed? Then I can order it and try to fix this myself. Thanks Edited March 28, 2021 by KwH012ill Quote Link to comment Share on other sites More sharing options...
jack barnes Posted October 11, 2021 Share Posted October 11, 2021 i have a promedia 4.1 subwoofer. i need to know the value and wattage R12 on digital converter board bash hc 610036 ver. 5. thank you for any assistance. jack Quote Link to comment Share on other sites More sharing options...
ConfusedAndBurnt Posted May 5, 2022 Share Posted May 5, 2022 Did anyone ever get an answer on R12?? Mine is cooked, too, and I would like to replace it. Quote Link to comment Share on other sites More sharing options...
jwarner Posted October 10, 2022 Share Posted October 10, 2022 I used this guide to replace mine and it works great. http://www.thompdale.com/bash_amplifier/bash_amp.htm Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.