Jump to content

Cut and paste system profile.


zuzu

Recommended Posts

Your system will sound better if you remove all the tweek items like the mass coupling stones,,blocks,,spikes etc etc.. They are blocking all the Van Allen megnetic fields that enhance audio ultrasonics.... Also you need to make a Reynolds Aluminum scull cap to protect from Gallactic radio interference. Rabbit ears optional.

Link to comment
Share on other sites

"RF-7 Klipsch speakers with [Dean xover], Rotel RB 1090 power amp, Audio Research SP 11 pre amp [ tweaked with Herbies tube dampers] and a Sony DVP NS9000ES SACD player [upgraded to level 6 by Vacuum State]. Anti-cable for speaker wire and Cat Cables silver Kingcats for interconnects. Velodyne DLS 5000R sub. Belkin Pure AV 31D power conditioner. All components including amps are plugged directly into the power conditioner which is on a dedicated 20 amp hard wired outlet. 1 Alan Maher Power Enhancer (PE) and one PE are plugged into the Belkin PLC. 5 more PE are in non a/v circuits on same phase of sub panel. Eight ASC Tube/Bass Traps. All components are on 2 side by side heavy oak racks each 6 1/2 feet tall. Every component is isolated from its shelf by Mapleshade isoblocks with a 2" thick maple block/platform on the isoblock and large brass cones between blocks and components.Large and small brass weights are on top of all components. SACD player, SP 11 power supply and 1090 amp also have laminated steel VPI bricks on top. RF-7 speakers are on large brass cones on maple blocks which have large carpet piercing cones under the blocks Six Shakti stones are taped to my main power panel and sub panel to filter noise. Maher reference pwr cords and (IEC) hammond chokes are on SACD and RB 1090. Double hammond chokes wired into PLC. Highwire coils to be added to 3 non detachable pwr cords."

Zu, I just performed what Greg descibed and it worked?

Link to comment
Share on other sites

"

RF-7 Klipsch speakers with [Dean xover], Rotel RB 1090 power amp, Audio Research SP 11 pre amp [ tweaked with Herbies tube dampers] and a Sony DVP NS9000ES SACD player [upgraded to level 6 by Vacuum State]. Anti-cable for speaker wire and Cat Cables silver Kingcats for interconnects. Velodyne DLS 5000R sub. Belkin Pure AV 31D power conditioner. All components including amps are plugged directly into the power conditioner which is on a dedicated 20 amp hard wired outlet. 1 Alan Maher Power Enhancer (PE) and one PE are plugged into the Belkin PLC. 5 more PE are in non a/v circuits on same phase of sub panel. Eight ASC Tube/Bass Traps. All components are on 2 side by side heavy oak racks each 6 1/2 feet tall. Every component is isolated from its shelf by Mapleshade isoblocks with a 2" thick maple block/platform on the isoblock and large brass cones between blocks and components.Large and small brass weights are on top of all components. SACD player, SP 11 power supply and 1090 amp also have laminated steel VPI bricks on top. RF-7 speakers are on large brass cones on maple blocks which have large carpet piercing cones under the blocks Six Shakti stones are taped to my main power panel and sub panel to filter noise. Maher reference pwr cords and (IEC) hammond chokes are on SACD and RB 1090. Double hammond chokes wired into PLC. Highwire coils to be added to 3 non detachable pwr cords."
That method worked here?
Link to comment
Share on other sites

I right-clicked on my profile (after highlighting it) and pasted it here. Seems to work okay.

RF-7 RC-7 RS-7 (4) & RSW-15

B&K Reference 31 processor

B&K Reference 7270 amplifier (200 x 7)

Integra DPS 8.3 DVD/multiplayer

Sony Playstation 3

Infocus SP7205 projector

DaLite 92" powered screen (high-contrast cinemavision material, tensioned)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...