caveboy

Or maybe I buy the RF-5 setup or RF-35 setup.. Suggestions are welcome, thkz..

Is the RF-7 setup too overkill for my room? My listening area is about 3m x 3.5m.. Suggestions are welcome, thkz..

Hey guys, recommend me a good amplifier to pair up with my denon 3805.. Currently using Klipsch RF-7, RC-7 and RS-7. Thanks..

As above.. Using the denon 3805 with klipsch RF-7, RC-7 and RS-7.. Thkz..

The specifications of RW-12 subwoofer as below, FREQUENCY RESPONSE: 21-120Hz ±3dB MAX ACOUSTIC OUTPUT: 113dB @ 30Hz 1/8 space, 1 meter ENCLOSURE TYPE: Bass-reflex via front-firing Corner Port AMPLIFIER: BASH® digital hybrid AMPLIFIER POWER: FTC Rated Power: 300 watts continuous @ <1% THD / Dynamic Power*: 615 watts @ <1% THD / *Dynamic power indicates the actual power this amplifier will deliver to the woofer under normal operating condi AUTO POWER ON: 2 second ON delay, 15 minute OFF delay LOW PASS CROSSOVER: Continuously variable from 40-120Hz, 24dB/octave slope above 120Hz INPUTS: 2) High level speaker binding posts, 2) Line level RCA phono jacks, 1) Line level LFE jack OUTPUTS: None PHASE: Continuously variable from 0 to 180 degrees DRIVE COMPONENTS: Subwoofer system using one 12" (30.48cm) front-firing, aluminum cone woofer WOOFER: K-1134-O 12" (30.48cm) Cerametallic® cone, steel frame DIMENSIONS: 19" (48.3cm) x 14.6" (37.1cm) x 21" (53.3cm) WEIGHT: 49 lbs. (22.3kg) ENCLOSURE MATERIAL: Medium density fiberboard construction (MDF) FINISHES: Light Cherry or Black Ash vinyl veneer VOLTAGE: 110/120 VAC 60Hz EXPORT VOLTAGE: 230 VAC 50/60Hz YEARS BUILT: 2003 - What does it mean by the FTC Rated Power: 300 watts continuous @ <1% THD / Dynamic Power*: 615 watts @ <1% THD / *Dynamic power indicates the actual power this amplifier will deliver to the woofer under normal operating condi??? Does it meant that the bass is actually 615 watts or what?? Please enlighten..

Specifications of RSX-5 speaker as below FREQUENCY RESPONSE: 92Hz-20kHz ±3dB SENSITIVITY: 93dB @ 2.83V / 1 meter POWER HANDLING: 75 watts continuous (300 watts peak) NOMINAL IMPEDANCE: 8 ohms compatible ENCLOSURE TYPE: Bass-reflex via rear-firing port DRIVE COMPONENTS: Two-way system using one 1" (2.54cm) magnetically shielded, titanium dome compression driver tweeter with a integral round 90° Tractrix® Horn and one 5.25" (13.34cm) magnetically shielded, aluminu TWEETER: One 1" (2.54cm) titanium dome compression driver HF CROSSOVER: 2000 Hz WOOFER: One 5.25" (13.34cm) Cerametallic® cone INPUT CONNECTIONS: One set of binding post speaker terminals DIMENSIONS: 12.5" (31.8cm) x 6.5" (16.5cm) x 9" (22.9cm) WEIGHT: 7 lbs. (2.7kg) ENCLOSURE MATERIAL: ABS, cast aluminum baffle and base FINISHES: Black or Silver MOUNTING: Base swivels 360° for on-wall mounting via keyholes YEARS BUILT: 2003 - What does it mean by power handling of the RSX-5, 75 watts continuous( 300 watts peak)?? And can the denon AVR-1804 receiver be able to power the speaker??

I have bought 4 rsx-5 and a rcx-4 bookshelf speakers.Which would be the best receiver for it? Looking around for quite some time...