dynastyraider

Hi guys. do you think the sony STRDN1040 is good enough for my setup? http://store.sony.ca/gsi/webstore/WFS/SNYNA-SNYCA-Site/en_CA/-/CAD/ViewProduct-Start?SKU=31-STRDN1040

Thanks Everyone. I'll need your help again when I already have it setup .

Another question. Is it ok to place either the RS 52 II or RS 62 II on a speaker stand?

Which onkyo, denon or harman kardon you can recommend? my budget is just around 1,000. what RMS per channel should I be looking for? I noticed you have pc12 ultra. do you think SVS pc12-nsd is good for my setup. my short list for the sub is now pair of SVS PB-1000 or SVS PB12-NSD OR 1 SVS pc12-nsd OR 1 SW 115

You're right I should I just worry about 5.1 for now. This is not the actual room but it will be the same size and layout. so probably just rb 61 II on both sides with a stand? do you think it will sound ok if i put rf 62 II as side speakers?

Sorry I'm in Canada. Which sub setup you recommend? pair of SVS PB-1000 or SVS PB12-NSD I can't have the RS speakers on the side because the right side of the room is open. so maybe i'll go with rs 52 at the back adnd rb 61 on the side? how about rf 62 ii as side speakers?

How about this as a sub? 1 SVS PB12-NSD or 2 PB-1000 I'll go with 12 gauge then. is this ok? http://www.monoprice.com/Product?c_id=102&cp_id=10239&cs_id=1023901&p_id=2789&seq=1&format=2&utm_expid=58369800-11.KFcpHWqASSutMqNPOqaJVg.0&utm_referrer=http%3A%2F%2Fwww.monoprice.com%2FCategory%3Fc_id%3D102%26cp_id%3D10239%26cs_id%3D1023901 which banana plug should i buy? http://www.monoprice.com/Category?c_id=109&cp_id=10401 Do you think receiver with a RMS of around 100-125 W per channel is enough for my setup? I don't intend to buy any amp. for my back speakers I think i'll just go with rs 52 ii. someone told me from another forum that the rs 62 ii is overkill for my setup. and maybe just go with rb 61 for my side speakers. here's the drawing of the room i'll be setting it up. the right side is open and beside the stairs. https://community.klipsch.com/index.php?/gallery/image/226-20131216-210124/

I'm planning to setup my home theater next year and I would like to start with Front = 2 RF-82 II Center = RC-62 II Sub = SW112 I'm already decided on those speakers but still haven't made my mind on the other speakers, receiver and wires. the home theater would just be used mainly for movies 80% and music. the room size is 15' x 14'. the room is not pre-wired for home theater so I'll be running wires around for my back and side speakers. I'm gonna start with 2.1 and eventually expand it to 7.1. 1. What gauge should I select for my speaker wires? 2. I have a short list of receivers. Onkyo TX-NR828 Denon AVR-X3000 PIONEER VSX-1123K Yamaha RX-V1075 Harman Kardon AVR 3700 Which do you think is the best for my setup? And can any of these receivers power my setup? Onkyo TX-NR727, TX-NR626, Denon AVR-X2000, OR RX-V675 When I was looking for receivers I was just searching for the RMS that's above 100w per channel. I know RF 82 II is 150 W. is that the correct way of looking for receivers that can power those speakers? 3. Which speakers should I choose for the rest of my setup Side = RF 62 II OR RB 61 II OR RB 81 Back = RS-52 II OR RB 61 II OR RB 81 Can I use RF 62 II as side or back speakers? Thanks.