[RP-600m or RP-502s rear surrounds]

On 4/11/2019 at 11:07 PM, spencersmb said:

If it was me I would move the Rears up a few feet to basically the back of the couch, just before the door/opening to the left of the couch. I would also hang them from the ceiling pointing down at the MLP.  It won't be directly to the left and right of the couch, slightly behind, but close enough I think. Ideally upgrade to a 7.1 system, leave the rears and add 502's just a bit in front of the main couch.

 

Something like the image attached
 

 

What is that ceiling mount please ? Omnimount ? I'm confused because the keyhole is at the bottom of the speaker right ? How does it hold in place with 

[Ceiling mount angled-down surround speaker]

Hi, I'm trying to find a way to ceiling mount RP-402S on my ceiling and angle them down.

I'd like the speaker to be as close as the ceiling as possible (I know it's not recommended but otherwise it will be in the way).

The keyhole being being low and the speaker a bit high, I didn't find any mount that could do that.

 

In my current setup, I have Omnimount 15.0C that are barely doing this for a 10inch speaker and it's nearly touching the ceiling. The RP-402 are 12inch-high.

 

So I've looked at : https://www.omnimount.com/products/speaker_mounts_and_stands/speaker_mounts/stainless_steel_series/25.0_c/

But they required to drill hole in the back of the speaker.

 

Any of you ever done that ? Any advise ?

Thanks !